All products Critical Point Drier Accessories - Delta Microscopies

Showing all 11 results


	Coverslips Holders Brass/Nickel plated. Coverslips can be stacked with spacers (up to 15 coverslips with a thickness up to 2mm) with samples placed on top of each coverslip. Fluids freely exchange between coverslips. Both spacers and weights come with the unit. The upper part of the holder is grooved to accept tweezers. Available in two configurations Coverslip Holder 1: for 9 to 13 mm diameter coverslips; accommodates 10 coverslips. Dimensions: 16mm (D) x 24mm (H) Coverslip Holder 2: for 16 to 22 mm diameter coverslips; accommodates 10 coverslips. Dimensions: 24mm (D) x 25mm (H)
	Critical Point Dryer; Sample Holder Small Particle Our unique small particle sample holder comes with a quick release particle screen, which is available in 3 different sizes, (30µm, 10µm and 2µm), accomodating a multitude of sample sizes. The overall dimension of the holder is 30.5 mm H x 30.5 mm D (1.20" x 1.20") and is made from 316 stainless steel. The interior dimension is 20 mm H x 20 mm D (0.80" x 0.80")
	Microporous Specimen Capsules These capsules measure 12mm in diameter and are 11mm high. They are available in two different pore sizes: 30 and 78 microns.
	Plastic Tissue Capsules Features Molded from polyethylene; resistant to all processing chemicals, including Zenker's fixative A three-compartment divider which is removable for specimens up to 35mm A weighted end floats the capsule in a upright position to conserve space Perforated on the top and bottom for better circulation of the fluid Snap-on hinged cover
	Specimen Holders Machined from solid steel, brass/nickel plated; incorporates a stainless steel mesh top and bottom to allow for fluid exchange. Available in three sizes 24 Specimen holder: comes with two sections; each section holds 12 specimens into 12 cavities, each cavity measuring 4.5 mm (D) x 6 mm (H). The overall unit measures: 24 mm (D) x 28 mm (H) 12 Specimen holder: comes with two sections; each section holds 6 specimens into 6 cavities, each cavity measuring 7.5 mm (D) x 6 mm (H). The overall unit measures: 24 mm (D) x 24 mm (H) 4 Specimen holder: comes with one section which holds 4 or multiples of or large samples 4-9 mm (D) x 16 mm (H) cavities. The overall unit measures: 24 mm (D) x 28 mm (H)
	Specimen/Cleaning Basket This basket is brass with a stainless steel mesh attached to both ends. To use, simply screw both halves together and you can keep small specimens for long periods of time during the process of fixing, dehydration or even critical point drying. It can also be used to hold small parts for ultrasonic cleaning. Mesh opening: 300 µm. Measurements: Inner Diameter 12.5 mm, Outer Diameter 16 mm, Height 16 mm
	Speciment Basket; Stainless Steel Both the top and the bottom are made from a stainless steel mesh, which offers good fluid circulation. Has a male and a female threading for secure closure. Measures: 10 mm (ID) x 13 mm (H) (½" x ½"), 12 mm (OD)
	Stainless Steel Baskets with Multiple Compartiment EMS has introduced and is now available a variety of Stainless steel baskets with lids and multiple compartments for critical point Drying. These baskets are either 15mm in diameter or 23mm.
	TEM Grid Holder Grid Holder Machined from solid steel; has a stainless steel mesh on the top and the bottom. Featuring the most advanced design which assures no damage to the grids during processing. These holders are Brass-Nickel plated, very sturdy, and withstand all critical conditions. Holds 12 grids in numbered slots. Dimensions: 24 mm (D) x 24 mm (H)
	TEM Grid Holder for CPD Machined from solid steel; has a stainless steel mesh on the top and the bottom. Featuring the most advanced design which assures no damage to the grids during processing. These holders are Brass-Nickel plated, very sturdy, and withstand all critical conditions. Holds 12 grids in numbered slots. Dimensions: 24 mm (D) x 24 mm (H)

12

0