.png){kind=small}
.png){kind=small}
Showing all 90 results
Filters
Sort results
Reset
Apply
 |
These cutters are used exclusively in the Leica EM Trim and are available in either… Show more (+) These cutters are used exclusively in the Leica EM Trim and are available in either 6 or 12 mm diameter. These blades allow for parallel edges of the complete block which is mandatory for successful sectioning. For more information : download the Diatome brochure Show less (-) |
 |
Introducing the EM5 - an innovative new design based on the widely used Ø8 mm… Show more (+) Introducing the EM5 - an innovative new design based on the widely used Ø8 mm size embedding mold. The unique two part design allows for easy removal of resin blocks, as well as incorporating many other advantages over currently available embedding products. Show less (-) |
 |
These holders are used to hold capsules upright during the resin embedding stage. The cavities… Show more (+) These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation.Use the clear if microwaving or UV polymerizing your embedding media. Made from Polypropylene.Available in two sizes: one holds size "00", conical, and bottle neck capsules; the other holds size #3 capsules. Available in white or clear.Size "00" Measures 5½" (L) x 4" (W) x ⅞" (H), 138 x 100 x 22mmSize "3" Measures 4¼" (L) x 2⅞" (W) x ⅝" (H), 107 x 72 x 15mm Show less (-) |
 |
Added to our extensive line of embedding capsules is our flat bottom capsules, which are… Show more (+) Added to our extensive line of embedding capsules is our flat bottom capsules, which are made from polyethylene, and are 8mm (just like the standard 00 capsules) in diameter. Also available in Microwave-Safe Polypropylene. Show less (-) |
 |
The EMS Capsule Press is designed to facilitate the removal of blocks, size 00 and… Show more (+) The EMS Capsule Press is designed to facilitate the removal of blocks, size 00 and 3, from the capsule without any damage to the block tip whatsoever.Using the Beem Press vidéo Show less (-) |
 |
This unique mold made from clear silicone has 18 cavities.
Each cavity measures 0.787"… Show more (+) This unique mold made from clear silicone has 18 cavities.
Each cavity measures 0.787" (20 mm) x 0.393" (10 mm) x 0.393" (10 mm) (L x W x D).
Overall mold dimensions: 5⅛ (130 mm) x 4-9/64" (105 mm) x 19/32" (15 mm) (L x W x D).
The mold has been tested to withstand 225°C. Show less (-) |
 |
A clear flexible LDPE mold. A great idea if you do not want to clean… Show more (+) A clear flexible LDPE mold. A great idea if you do not want to clean the molds. Same as our flat embedding silicone molds.2 Troughs: 1" L x ⅛" W x ⅛" D14 Cavities: ¼" L x ½" W x ⅛" D1 Trough: 2¾" L x 3/32" W x ⅛" D10 Cavities: ⅜" L x ¾" W x ⅛" D Show less (-) |
 |
This deep well mold offers an inner depth of 11mm with a width of 35mm… Show more (+) This deep well mold offers an inner depth of 11mm with a width of 35mm. The inner cavity has 66 cavities. Each cavity is 3⁄16" (4.7mm). Labelled A-F horizontally and 1-11 vertically.The overall dimensions of the mold are: 1¾ x 2¾ x ⅝" (45 x 70 x 16mm) thick. The inner dimensions are: 1.37 x 2.36 x .43" (35 x 6 x 11mm).The molds have been tested to withstand up to 225° C. They are available in blue silicone or clear. Show less (-) |
 |
Made of Lucite, these EMS Mounting Cylinders have smooth ends for attaching pyramid-tips easily.Dimensions:… Show more (+) Made of Lucite, these EMS Mounting Cylinders have smooth ends for attaching pyramid-tips easily.Dimensions: 8 mm diameter x 13 mm length Show less (-) |
 |
This unique silicone mold comes in 3 different types of silicone, clear, white and blue… Show more (+) This unique silicone mold comes in 3 different types of silicone, clear, white and blue, and has 2 different cavity sizes to meet all of your embedding needs.2 Troughs: 1" L x ⅛" W x ⅛" D14 Cavities: ¼" L x ½" W x ⅛" D1 Trough: 2¾" L x 3/32" W x ⅛" D10 Cavities: ⅜" L x ¾" W x ⅛" DEach cavity has an alpha-numeric marking, A1-A7, B1-B7, C1-C5, D1-D5Overall mold measures: 4¾" L x 3" W x ¼" H (121 x 76 x 6 mm) Show less (-) |
