The EM-Tec S-Clip sample holders all comprise one or more springloaded sample clips (S-Clips) either on an SEM sample stub or a SEM sample holder. The springloaded S-clips are specifically designed to hold thin specimens up to 2mm on a holder. Optional stand-off pillars are available to accomodate thicker samples. Small washers can also be used to increase the clamping height.
\nThe S-clip are mounted with a small M2 screw which allows the S-clip to rotate. The S-Clips are made from conductive spring grade copper alloy; samples are clamped securely without the need for conductive adhesives or conductive pastes. Sample changing is quick, easy and clean; contamination issues due to adhesives or glues are eliminated. They are ideal to hold Si chips and other thin samples.<\/p>\n
The EM-Tec S-Clip SEM sample holders are available for the following SEM platforms:
\n– Standard pin stubs for FEI, Philips, Tescan, Phenom, Aspec, Cambridge, CamScan, Leica etc
\n– Zeiss pin stubs (shorter pin) for Zeiss & LEO SEMs
\n– JEOL plain cylinder sample stubs
\n– Hitachi M4 cylinder sample stubs<\/p>\n
The EM-Tec S-Clip sample holders are available to hold samples horizontal (flat), at 45\u00b0 or at 90\u00b0. The 45\u00b0 and 90\u00b0 are useful for holding cross sections of thin samples and wafer pieces. EM-Tec S-Clip sample holders are a cost effective alternative for the 1\u201d-3\u201d wafer holders. They can hold the smaller 1\u201d(25.4mm), 2\u201d (51mm) and 3\u201d(76mm) wafers if it is allowed to hold the wafer down with the S-Clips:
\n– EM-Tec S-Clip holders with 38m stub diameter is suitable for: 1\u201d (25.4mm) wafers
\n– EM-Tec S-Clip holders with 63m stub diameter is suitable for: 2\u201d (51mm) wafers
\n– EM-Tec S-Clip holders with 100mm stub diameter is suitable for: 3\u201d (76mm) wafers<\/p>\n
The EM-Tec S-Clips are also separately available to enable customers to make their own custom made sample clip holders. Dimensions are 12.8mm long, tip is 1.6mm wide, height is 1.5mm with a \u00d82.2mm hole for mounting with an M2 screw. Made from 0.25mm thin spring grade copper alloy. Include with the EM-Tec S-clips are the M2x3 mounting screws.<\/p>\n
Sample thickness is 0-2mm for the standard EM-Tec S-Clip. With stand-off pillars thicker samples can be accomodated. Stand-off pillars are 4mm high; they can be mounted between the S-Clap and the holder; they are stackable.<\/p>\n","protected":false},"excerpt":{"rendered":"
The EM-Tec S-Clip sample holders all comprise one or more springloaded sample clips (S-Clips) either on an SEM sample stub or a SEM sample holder. The springloaded S-clips are specifically designed to hold thin specimens up to 2mm on a holder. Optional stand-off pillars are available to accomodate thicker samples. Small washers can also be […]<\/p>\n","protected":false},"featured_media":0,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","inline_featured_image":false},"product_brand":[1914,1915,1913],"product_cat":[1376,1296,1297,1365,1436],"product_tag":[],"class_list":{"0":"post-295396","1":"product","2":"type-product","3":"status-publish","5":"product_brand-hitachi","6":"product_brand-jeol","7":"product_brand-zeiss","8":"product_cat-accessoires-par-marque-de-microscope-en","9":"product_cat-supports-et-adaptateurs-en","10":"product_cat-tubes-cylindres-plots-supports-et-adaptateurs-en","11":"product_cat-meb-sem-en","12":"product_cat-zeiss-en","14":"first","15":"instock","16":"taxable","17":"shipping-taxable","18":"purchasable","19":"product-type-variable"},"yoast_head":"\n