.png){kind=small}
.png){kind=small}
Description
This silicone cures at room temperature with no shrinkage and offers a unique water clear see through rubber with excellent tear strength, chemical and heat resistance. Technical Overview
| Hardness Shore A 6 | 40 |
| Color | Translucent |
| Pot Life | 60 min. |
| Demold Time | 16 hours |
| Specific Volume | 25.8 |
| Specific Gravity | 1.07 |
| Mixed Viscosity | 35,000cps |
| Die B Tear Strength | 120 pli |
| Tensile Strength | 800 psi |
| Shrinkage | Negligible |
| Mixing Ratio Wt. Or Vol. | 100:10 pbw |
Curing: allow the mold to cure overnight (at least 16 hours) at room temperature (77°F/25°C) before demolding. Do not cure rubber where temperature is less than 65°F/18°C. Post Curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 80°C for 2 hours and 100°C for 2 hours. Allow mold to cool to room temperature before using
NOTE: This clear silicone will cause rubber to yellow when applying post curing.
Ordering: Clear silicone comes as a kit of 1gallon (9 lb) silicone A and 1 pt (.9lb) curing agent B
Reviews
There are no reviews yet.