Lowicryl, Embedding Kit

Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.
The K4M kit is usable to -35°C and is a polar (hydrophilic) medium, while the HM20 kit can be used down to -70°C and is nonpolar (hydrophobic).
Lowicryl’s K11M and HM23 have properties similar to K4M and HM20, but can be used at temperatures 20 degrees lower than others: K11M at -60°C, HM23 at least -80°C. All of these resins are photopolymerized by long wavelength (360nm) ultraviolet light. Since the initiation of the polymerization is largely independent of temperatures, blocks may be polymerized at the same temperatures used for infiltration. The resin may also be chemically polymerized at 60°C.
Armbruster, B.L. et al, (1982). J. Microscopy 126: 77
Carlemalm, E. et al, (1985). J. Microscopy 140:55
Hayat, M.A. (Ed.). (1989) Priciples and Techniques of Electron Microscopy, 3rd Edition. CRC Press,Inc. Boca Raton, Florida.

Available Options:

Description

RT D14330 Lowicryl K4M MSDS_14330-A MSDS_14330-B MSDS_14330-C kit
RT                    D14340 Lowicryl HM20 MSDS_14340-D MSDS_14340-E MSDS_14340-C kit
RT                    D14350 Lowicryl K11M MSDS_14350-C MSDS_14350-H MSDS_14350-I kit
RT                    D14360 Lowicryl HM23 MSDS_14360-C MSDS_14360-F MSDS_14360-G MSDS_14360-J kit

Technical Data sheets and Newsletter

Additional information

Unit

kit, kit

Reviews

There are no reviews yet.

Be the first to review “Lowicryl, Embedding Kit”

Your email address will not be published. Required fields are marked *

0

Your Cart