WINLAB Slide Staining Racks and Carriers

Stainless Steel and Plastic Slide Racks
They are very good chemically as well as thermally
Have limited uses in microwave and solvents
When it comes to inserting the slide, easy to break the glass or tear the tape on abrupt edges

REF: D71430 Category:

Available Options:

Description

Stainless Steel and Plastic Slide Racks
They are very good chemically as well as thermally
Have limited uses in microwave and solvents
When it comes to inserting the slide, easy to break the glass or tear the tape on abrupt edges

WINLAB Slide Racks
WINLAB Racks are made from Poly-ceramic that maintains its structural integrity to 200°C in any solvent while being microwaved
WINLAB Racks last a lot longer than any other materials
WINLAB Racks save time and money
Advantages of WINLAB Slide Racks
Made from Poly-Ceramic with more than 40 years of product development and state of the art molding technology
Microwave Safety – in a distortion-free rack
Chemical Resistant – to all solvents below 200°C
Designed – for histology and cytology staining and coverslipping
Quality Control – Every rack is tested for performance criteria and dimensional accuracy, ensuring consistency, which makes WINLAB a name you can trust
WINLAB Racks fit the Tissue-Tek Tape Machines
Easy Slide Insertion – V-Groove slots

1. WINLAB 30-Slide Racks
WINLAB 30-Slide Racks are available in two models: LS-30 and LSM-30.
The LS-30 is held rigid by the carrier the same way as the Sakura/Bayer models, preferred for Leica stainers. Handle positions: 1 x vertical, 2 x 45°, and 2 x 90°.
The LSM-30 version swivels by carrier as does the Medite stainless steel racks and has the advantage of fitting Leica, VBS, Bayer, Sakura, Medite, coverstaining machines and Sakura tape coverslipper.
Handle position: Swivel 45°.
WINLAB 30-Slide Racks measure: 4½” L x 1⅜” W x 2½” H (115 x 35 x 64 mm).

 

2. WINLAB 20-Slide Racks
WINLAB 20-Slide Racks are available in two models: LS-20 and LSM-20 (LSM-20 fits Medite stainers).
WINLAB 20-Slide Racks are fitted to a Sakura Staining Dish, either Green or White and also fits most other staining dishes.
Racks measure: 3″ L x 1″ W x 2½” H (77 x 25 x 64 mm).

3. WINLAB 30-Slide Rack Carrier
Steel wire hooks are molded to the polypropylene handle to form Slide Rack Hanger. The Slide Rack Hanger is very easy to attach or detach from the WINLAB Slide Racks.
30-Slide Rack Carriers fit all Models LS-30 and LSM-30 above.

4. WINLAB 20-Slide Rack Carrier
Same construction as 30-Slide Rack Carrier but fits all LS-20 and LSM-20 Slide Racks.

5. WINLAB 30-Slide Rack Carrier for InstrumenC/DAKO Slide Racks

6. WINLAB 20-Slide Rack Carrier for InstrumenC/DAKO Slide Racks

7. WINLAB Slide Rack Wire Handles
Steel wire is bent to form a handle. Use these handles for manual staining and the Medite stainer.
Model W3-5 fits all WINLAB 30-Slide Racks.
Model W3-6 fits all WINLAB 20-Slide Racks.

8. WINLAB Plastic Handles
Model SR-20 for all 20-Slide Racks
Model SR-30 for all 30-Slide Racks
These handles are economical as well as microwave safe and solvent resistant. They may be used for all manual staining to avoid unwanted chemical and heat contact.

Additional information

Unit

each

Reviews

There are no reviews yet.

Be the first to review “WINLAB Slide Staining Racks and Carriers”

Your email address will not be published.

0

Your Cart