.png){kind=small}
.png){kind=small}
Showing all 55 results
 | |
 | All of our ready-to-use buffers are: - Conveniently packaged. - Prepared fresh for each order. - Economical and time-saving. - Desired pH should be specified when ordering. The buffer is a vehicle for the fixative and requires certain properties: 1-To maintain constant pH during the time of the fixation. The pH of the fixative in EM is adjusted using the buffer system chosen; e.g. range 6.5-8.0. 2-The ionic constitution to prevent the extraction of cellular components, or the deposition of precipitates of fixative chemicals.
|
 | This ready-to-use Antibody Dilution Buffer is designed for the dilution of antibodies in all immunoassays, including immunofluorescence, IHC, ELISA, WB. This buffer contains immunoglobulin free BSA and does not contain phosphate, sodium azide, or mercury preservatives. It can be used for the dilution of all antibodies, including peroxidase, and antibodies to phophoproteins. However, it is not suitable for dilution of antibodies to S100 proteins. This buffer contains green food color. Reagent Supplied: Ready to use buffer Application: Dilute antibodies, primary or secondary as recommended in the protocol by the manufacturer of these products. Storage: 2-8°C. Diluted antibodies can be stored at 2-8°C for several weeks, depending upon the stability of antibodies. |
 | Borate Buffer 500 ml differents pH : 7,8 or 8,2 or 9,0 as you like. Storage : RT |
 | (Dimethylarsinic Acid) (CH3)2AsO2H F.W. 137.99 CAS #75-60-5 Assay 99.5% Storage :RT unit. 25 g / 100g |
 | Cacodylic Acid- Sodium Salt , TrihydrateSodium Cacodylate powder
|
 | calcium chloride CaCl2·2H2O F.W. 147.02 CAS #10035-04-8 Storage : RT Unit : 100g d |
 | |
 | Description: This buffer is intended for heat-induced antigen retriever on formalin-fixed paraffin-embedded (FFPE) tissue sections prior to application of antibodies. In IHC most commonly used fixative like formalin mask tissue antigens (cellular, membrane and nuclear) by cross-linking process, this results in poor or no staining in IHC. The use of this buffer on FFPE tissue section improves accessibility of antibodies to tissue antigens.
Storage: 2-8°C. DO NOT FREEZE
Intended Use: 1x buffer solution is intended for heat-induced antigen retriever in IHC. Please refer to primary antibody protocol.
Reagent: 10x, pH 6 antigen retriever solution.
Preparation of Working Solution:Dilute this 10x buffer as needed (e.g. 90 ml of deionized or distilled water + 10 ml of this buffer), mix well, 1x buffer can be stored at 2-8°C
MSDS |
 | Used as an activator for the Vestopal embedding resin in solution d
|
