Showing all 18 results

Category
Sort by Name A - Z
Showing 1 – 10 of 18 results Showing all 18 results Showing the single result No results found
10 per page
Filters Sort results
Reset Apply
A Swiss made saw frame lightweight and perfectly balanced. Its ergonomic wooden handle reduces fatigue…
Show more (+)
A Swiss made saw frame lightweight and perfectly balanced. Its ergonomic wooden handle reduces fatigue and provides greater dexterity. Patented blade-lock design eases blade insertion and maintains perfect alignment which eliminates wobble and reduces blade loss during use. It measures 2¼" (70 mm) deep and accepts saw blades up to 1.2 mm diameter and 130 mm long. This Saw Frame may be used ideally with the Diamond Wire and Spiral Saw Blades shown below.
Show less (-)
These stones are natural with close density oil-tones, and excellent qualities that make them the…
Show more (+)
These stones are natural with close density oil-tones, and excellent qualities that make them the stone unequaled for sharpening tools such as gravers, knives, etc. Comes in a cedar wood box and they are available in two types: translucent (extra fine); and hard (fine). Translucent Stone Size 4" x 2" x ½" (102 x 51 x12.7mm) Hard Size 6" x 2" x ½" (152 x 51 x 12.7 mm)
Show less (-)
This patented process of heat treatment which bonds the highest quality industrial grade diamond particles…
Show more (+)
This patented process of heat treatment which bonds the highest quality industrial grade diamond particles in a stainless alloy to a precision matched metal substrate, has been imitated, but has never come close to being duplicated. Our stone which is set on a walnut pedestal with a cover is available in 3 grades: F- fine grit (600); M - medium grit (270), and C - coarse grit (180). Stone size is 2”x6” (51 mm x 152 mm)
Show less (-)
This diamond stylus is perfectly suited for the Thermo Scientific PrintMate and MicroWriter, RA Lamb…
Show more (+)
This diamond stylus is perfectly suited for the Thermo Scientific PrintMate and MicroWriter, RA Lamb and TBS Shurmark microscope slide labelers. Manufactured with a consistent even coating of diamond dust. The 2.35 mm shaft is made from stainless steel. Unit : 6/pk
Show less (-)
Permanently be able to mark all of your important tools and samples. The Engraver comes…
Show more (+)
Permanently be able to mark all of your important tools and samples. The Engraver comes with a Battery Pack and is operated on two "AA" Batteries Our EMS Engraver Engraves Test Tubes, Bottles, Racks, Keys etc as well as anything made from glass, metal, stone as well as bone. Engravings are permanent and will not disappear in the presence of chemicals and solvents. The Engraver is 7" in Height ( 17.8cm). We offer a Stand for the EMS Engraver that is made from polypropylene and it measures (3½ x 3⅜")
Show less (-)
Made from hardened steel, this tool has three razor sharp cutting edges ranging from a…
Show more (+)
Made from hardened steel, this tool has three razor sharp cutting edges ranging from a very sharp point to one that is approximately 10mm in length. These nickel plated triangular tools are mounted in red and black plastic handles. Tool length is 30 mm by 2.1 mm across (1.2" x .08"). The overall length of the tool is 154 mm (5.7").2 tools/set. each
Show less (-)
A newly designed diamond scribing tool set containing eight precision natural diamond scribes in various…
Show more (+)
A newly designed diamond scribing tool set containing eight precision natural diamond scribes in various sizes and configurations. This set is perfect for precision work in microscopy. The set consists of eight diamond tips, 3 mm in diameter and are mounted in interchangeable tool cones and an MT-1 tool handle. The tool and handle are all housed in a hardwood instrument case. Individual scribers can be purchased separately.
Show less (-)
This diamond scriber is the ultimate scribing instrument offering the most precision for the most…
Show more (+)
This diamond scriber is the ultimate scribing instrument offering the most precision for the most delicate applications. It is available in straight or bent configurations. Applications Include – Fine scribing under the microscope – for silicon wafers and glass coverslips – Precision scribing and repairing – for thin film circuits and microcircuits, etc. These diamond […]
Show less (-)
It is similar construction with Micro-Ruler above, but comes with the 2.5x magnify Mirror…
Show more (+)
It is similar construction with Micro-Ruler above, but comes with the 2.5x magnify Mirror - made from polished stainless steel, 4.8 mm diameter. Overall length is 230mm. each
Show less (-)
Features Precision etched, non-glare ruler made from surgical stainless steel, only 3 mm wide. The…
Show more (+)
Features Precision etched, non-glare ruler made from surgical stainless steel, only 3 mm wide. The ruler is calibrated in 0.1 mm graduations, 10 mm total range. Stainless steel handle 230 mm long. Balanced and angled for the ultimate in flexibility able to reach into areas which are impossible for other measuring devices. Available without a stainless steel autoclave case. Total weight of the ruler is 26 g. Applications include microscopy, chemistry and anywhere precise measurement in clean and very confined areas are of critical importance. each
Show less (-)
1 2
0

Your Cart