.png){kind=small}
.png){kind=small}
Showing all 16 results
Filters
Sort results
Reset
Apply
 |
PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper… Show more (+) PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper operating temperature of 250°C and vapor pressure of 1.3 x 10-12 at 25°C, it is robust, versatile and can be used for sealing and lubricating under the most extreme operating conditions. This includes environments where aggressive chemicals and strong oxidising agents are regularly used.
MSDS Show less (-) |
 |
Apiezon AP100 Grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely… Show more (+) Apiezon AP100 Grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases.
Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate.
MSDS Show less (-) |
|
Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety… Show more (+) Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications.
MSDS Show less (-) |
 |
Type H grease is designed for high temperatures (-10 to +240°C) in a wide range… Show more (+) Type H grease is designed for high temperatures (-10 to +240°C) in a wide range of applications in both science and industry. With good "friction", grease H is ideal for use with laboratory glassware, but combined with properties of high thermal conductivity, it is the perfect choice for the electronics and space industries where heat sink media require adhesion.
Grease H is a filled hydrocarbon which exhibits excellent thermal conductivity, and strong absorption properties. The capability to absorb greasy or chemical impurities on metal and glass surfaces is a value "tool" required by electronic industries.
MSDS
Show less (-) |
|
Grease L is a petroleum hydrocarbon grease, containing no additives. Very low vapor pressure (@20°C… Show more (+) Grease L is a petroleum hydrocarbon grease, containing no additives. Very low vapor pressure (@20°C of 8x10-11 torr), high vacuum grade. Type L is widely used in the stationary phase of gas liquid chromatography, and may be used on all ground joints in a vacuum system (not for stopcocks). Its solubility is as follows: in Ethanol at 20°C-0.003%; 60°C-0.005%; 100°C-0.011%; 150°C-0.011%. Grease L softens and melts at about 47°C and it is not recommended for joints where temperatures exceed more than 30°C in use. Grease T is recommended for these higher temperatures.
MSDS
Technical data sheet
Show less (-) |
|
Similar to grease type L, but it contains more wax. Grease M has an estimated… Show more (+) Similar to grease type L, but it contains more wax. Grease M has an estimated vapor pressure @ 20°C of 2x10-9 torr, higher than Type L. Type M is recommended for applications where a grease of moderately low vapor pressure is required; such as for sealing ground joints on the backing side of oil diffusion pumps.
MSDS
Technical data sheet
Show less (-) |
|
Similar to Type L and Type M, but Type N grease has a special additive… Show more (+) Similar to Type L and Type M, but Type N grease has a special additive which gives it a tenacious, rubbery consistency and provides an extra cushioning effect which absorbs vibrations in equipment, making N grease invaluable in fragile glass to glass joints, like burette taps, which continually risk fracture. Grease N is widely recognized and recommended as the cryogenic vacuum grease of choice.
MSDS
Technical data sheet
Show less (-) |
|
Type T is designed for lubricating glass taps and for general purposes. Has a melting… Show more (+) Type T is designed for lubricating glass taps and for general purposes. Has a melting point of 125°C and has an estimated vapor pressure @ 20°C of 5x10-9 torr. Although type T is useful at higher temperatures, it can also be used at ambient temperatures.
Temperature range: 0-120°C.
MSDS
Show less (-) |
 |
Apiezon Vacuum Sealing, Mounting, and Etching Waxes
The Apiezon range of waxes features three products… Show more (+) Apiezon Vacuum Sealing, Mounting, and Etching Waxes
The Apiezon range of waxes features three products including the popular Apiezon Wax W, also known as 'Black Wax'.
All three waxes in the Apiezon range can be used as permanent or semi-permanent vacuum sealants or mounting media. Apiezon Wax W is also a perfect etch resist.
q Show less (-) |
 |
A silicone lubricant for glass-to-glass joints and glass-to-rubber connections. Resistant to most chemicals and is… Show more (+) A silicone lubricant for glass-to-glass joints and glass-to-rubber connections. Resistant to most chemicals and is inert and heat stable. Show less (-) |
