.png){kind=small}
.png){kind=small}
Showing all 83 results
Filters
Sort results
Reset
Apply
 |
Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range… Show more (+) Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.
The K4M kit is usable to -35°C and is a polar (hydrophilic) medium, while the HM20 kit can be used down to -70°C and is nonpolar (hydrophobic).
Lowicryl's K11M and HM23 have properties similar to K4M and HM20, but can be used at temperatures 20 degrees lower than others: K11M at -60°C, HM23 at least -80°C. All of these resins are photopolymerized by long wavelength (360nm) ultraviolet light. Since the initiation of the polymerization is largely independent of temperatures, blocks may be polymerized at the same temperatures used for infiltration. The resin may also be chemically polymerized at 60°C.
Armbruster, B.L. et al, (1982). J. Microscopy 126: 77
Carlemalm, E. et al, (1985). J. Microscopy 140:55
Hayat, M.A. (Ed.). (1989) Priciples and Techniques of Electron Microscopy, 3rd Edition. CRC Press,Inc. Boca Raton, Florida. Show less (-) |
|
The London Resin Company's acrylic "LR Gold" offers the histochemist and immunocytochemist the advantage of… Show more (+) The London Resin Company's acrylic "LR Gold" offers the histochemist and immunocytochemist the advantage of working with unfixed tissues at low temperatures, thus allowing many fixation-sensitive procedures to be carried out in 1-4 microns resin sections at -25°C using visible light. It is non-toxic and has a low viscosity. Show less (-) |
 |
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR… Show more (+) A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching […] Show less (-) |
|
Unit : 225 ml |
|
The mixture of Butyl and Methyl Methacrylate offers many advantages over the standard GMA and… Show more (+) The mixture of Butyl and Methyl Methacrylate offers many advantages over the standard GMA and HPMA embedding mediums: - It can be UV cured in the cold with the addition of benzoin methyl ether, or heat cured by the addition of benzoyl peroxide. - The resin can be removed from the sections with a solvent (acetone) before staining. Show less (-) |
|
Unit : 500 ml
storage : 0-5°C |
|
C10H10O3 F.W. 178.19 CAS #25134-21-8
Specific Gravity @20/20°C : 1.245
b.p… Show more (+) C10H10O3 F.W. 178.19 CAS #25134-21-8
Specific Gravity @20/20°C : 1.245
b.p. @ 10mm Hg : 140°C
An epoxy hardener
MSDS
Storage : RT Show less (-) |
|
Specially Distilled EM Grade F.W. 227 … Show more (+) Specially Distilled EM Grade F.W. 227 CAS #28928-97-4 b.p. 325°C Viscosity: 102.8 at 25°C Density: 1.08gm/cm3 An epoxy hardener specially distilled.The special distillation process offers you much clearer blocks than the standard NSAMSDS Storage : RT Show less (-) |
|
Formulated specifically for the preparation of petrographic thin sections, EMS Petrographic Epoxy Kits are the… Show more (+) Formulated specifically for the preparation of petrographic thin sections, EMS Petrographic Epoxy Kits are the only epoxy mounting medium which is supplied with everything needed to dispense, mix and apply the medium. No more guessing at proportions, and improvising stirring rods and mixing containers. Show less (-) |
 |
An effective solvent for loosening and suspending polymerized epoxy resin.or Please see Methylene Chloride… Show more (+) An effective solvent for loosening and suspending polymerized epoxy resin.or Please see Methylene Chloride MSDSStorage : RT Show less (-) |
