.png){kind=small}
.png){kind=small}
Showing all 49 results
Filters
Sort results
Reset
Apply
 |
Polyethylene embedding capsules with 1x1mm face at the tip of a truncated pyramid, each with… Show more (+) Polyethylene embedding capsules with 1x1mm face at the tip of a truncated pyramid, each with a hinged cap. Show less (-) |
 |
A two tone color coded plastic box with insert, which allows for the storage of… Show more (+) A two tone color coded plastic box with insert, which allows for the storage of up to 10 blocks in the numbered cavities. Measures: 2⅓" (L) x 1¾" (W) x ½" (H) 57 x 45 x 12.5 mm Show less (-) |
 |
These holders are used to hold capsules upright during the resin embedding stage. The cavities… Show more (+) These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation.Use the clear if microwaving or UV polymerizing your embedding media. Made from Polypropylene.Available in two sizes: one holds size "00", conical, and bottle neck capsules; the other holds size #3 capsules. Available in white or clear.Size "00" Measures 5½" (L) x 4" (W) x ⅞" (H), 138 x 100 x 22mmSize "3" Measures 4¼" (L) x 2⅞" (W) x ⅝" (H), 107 x 72 x 15mm Show less (-) |
 |
These capsules, made from polyethylene, produce blocks with a 5.6mm O.D. and a… Show more (+) These capsules, made from polyethylene, produce blocks with a 5.6mm O.D. and a pyramid tip. Comes complete with a hinged cap. Show less (-) |
 |
Available in two specially shaped capsules which are designed to overcome commonly encountered embedding problems;… Show more (+) Available in two specially shaped capsules which are designed to overcome commonly encountered embedding problems; such as, small or thin elongated specimens and powder samples. These capsules are also good for centrifuging precipitated matters and allows for less trimming.The bottle neck capsule produces a 7.9mm OD block with a hemihyperpoloid (rather than faced) tip.The conical capsule produces a 7.9mm OD block with a conical (rather than faced) tip Show less (-) |
 |
Are your bench-tops and drawers crowded with petri dishes and pillboxes full of various sized… Show more (+) Are your bench-tops and drawers crowded with petri dishes and pillboxes full of various sized specimen blocks?Have you been spent hours to look for a block for re-sectioning?Do you wish you could neatly catalog, file and store all of those blocks in one convenient place? Show less (-) |
 |
Molded from polyethylene. The critical surfaces of the mold are transparent, facilitating accurate specimen orientation… Show more (+) Molded from polyethylene. The critical surfaces of the mold are transparent, facilitating accurate specimen orientation through bottom illumination. Molds are reusable and each mold is supplied with a protective box.
The cavity measures: 12 mm L x 5 mm W x 3 mm D
Overall mold measures: 52 mm L x 40 mm W x 5 mm H
Storage box measures: 2⅓" L x 1¾" W x ½" H (57 x 45 x 12.5 mm)
each Show less (-) |
 |
Made from silicone
It accommodates 96 gelatin capsules size "00" and "000" and BEEM® "00"
… Show more (+) Made from silicone
It accommodates 96 gelatin capsules size "00" and "000" and BEEM® "00"
for resin polymerization in an oven
Mesures : 110mm x 72mm Show less (-) |
 |
Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance… Show more (+) Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable and produce embedding blocks of numerous shapes and sizes with a wide variety of tips. We also offer a mold which produces blocks to be used for re-embedding. Choose the one that best suits your embedding needs! Show less (-) |
 |
Natural, hard gelatin capsules. To be used as an embedding mold for water miscible resins… Show more (+) Natural, hard gelatin capsules. To be used as an embedding mold for water miscible resins, or resins which need to be cured by transmitted light. Gelatin capsules dissolve or disintegrate within 5 minutes when immersed in a 0.5% HCl solution at 36-38°C, within 2 minutes in water at 37°C or in artificial gastric juice. Show less (-) |
