.png?strip=all){kind=small}
.png?strip=all){kind=small}
Filtres Trier les résultats
Rafraîchir Appliquer
 | ||||
 | The block is comprised of 45 materials and Faraday Cup: | |||
 | ||||
 | Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs.
Platinum Apertures size tolerances vary as follow:
- Nominal hole diameter: +/- 1 micron
- Disc diameter: +/- 10 microns
- Disc thickness: +/- 10 microns
Ordering information: Gold (Au); Platinum (Pt); Molydenum Mo
Hole Sizes not listed are available upon special request. | |||
| Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs.
Platinum Apertures size tolerances vary as follow:
- Nominal hole diameter: +/- 1 micron
- Disc diameter: +/- 10 microns
- Disc thickness: +/- 10 microns
Ordering information: Gold (Au); Platinum (Pt); Molydenum Mo
Hole Sizes not listed are available upon special request. | |||
 | Description: Anodized aluminum block sized to fit 64 1.5 ml microtubes (16 holes per 'step') for easy viewing of samples when in the freezer, on the bench-top or in an ice pan or ice bucket.
| |||
| Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs.
Platinum Apertures size tolerances vary as follow:
- Nominal hole diameter: +/- 1 micron
- Disc diameter: +/- 10 microns
- Disc thickness: +/- 10 microns
Ordering information: Gold (Au); Platinum (Pt); Molydenum Mo
Hole Sizes not listed are available upon special request. | |||
 | ||||
 | JEOL 100CX Standard Holder in brass for use in the STEM mode. Holds up to 7 standards of your choice. | |||
 | We offer a comprehensive choice of standard pin stubs to support virtually all applications. The standard SEM pin stubs are compatible with Thermo Fisher, FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs. They are made from vacuum grade aluminium. They are machined according to the original manufacturer's specifications and dimensions. The flat pin stubs from 12.7mm to 38mm diameter are grooved for easy and clean handling. The most used pin stubs are the Ø12.7 mm and the Ø25.4 mm pin stubs. Pins are all 3.2mm diameter with a length of either 8mm or 9.5mm. The Ø12.7 mm pin stubs are also available in brass, copper and high purity carbon. |
