.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
Affichage de 1–150 sur 164 résultats
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
A Swiss made saw frame lightweight and perfectly balanced. Its ergonomic wooden handle reduces fatigue… Show more (+) A Swiss made saw frame lightweight and perfectly balanced. Its ergonomic wooden handle reduces fatigue and provides greater dexterity. Patented blade-lock design eases blade insertion and maintains perfect alignment which eliminates wobble and reduces blade loss during use. It measures 2¼" (70 mm) deep and accepts saw blades up to 1.2 mm diameter and 130 mm long. This Saw Frame may be used ideally with the Diamond Wire and Spiral Saw Blades shown below. Show less (-) |
 |
Designed to hold 8 or less micro-tools and one MT handle.
each |
 |
EMS's Alumina Powders are accurately controlled for all specs and particle size distribution, assuring you… Show more (+) EMS's Alumina Powders are accurately controlled for all specs and particle size distribution, assuring you the best polishing results. The following micron sizes are available: 0.05, 0.3, and 1.0.
Typical applications are
- Precision Optics
- Metallographic Sections
- Electro-Optical Crystals
- Silicone Wafers
- Ferrite Components
- Gem Stones
- Acrylic lenses
Type DX Alumina Powder is specially treated to reduce the number of agglomerates (group of particles in each grade of manufactured alumina). The result is fast polishing and improved quality of the finished products.
Type N Alumina Powder is recommended when these improvements are not necessary.
MSDS Show less (-) |
 |
These suspensions are water-based and contain no additives, which may interfere with polishing or contaminate… Show more (+) These suspensions are water-based and contain no additives, which may interfere with polishing or contaminate the sample. All slurries are very stable and alumina is evenly dispersed. Excellent for the finest finishes.
MSDS
Show less (-) |
 |
Alumina is widely used in sample grinding and polishing. Our Aluminum Oxide Abrasive film with… Show more (+) Alumina is widely used in sample grinding and polishing. Our Aluminum Oxide Abrasive film with a PSA back or a plain back are ready to use in all sample polishing applications.
Dimensions: 8" Diameter Show less (-) |
 |
These are abrasive powders that are prepared from aluminum oxide, offering excellent coarse and intermediate… Show more (+) These are abrasive powders that are prepared from aluminum oxide, offering excellent coarse and intermediate polishing, with fast results.MSDSa Show less (-) |
 |
These stones are natural with close density oil-tones, and excellent qualities that make them the… Show more (+) These stones are natural with close density oil-tones, and excellent qualities that make them the stone unequaled for sharpening tools such as gravers, knives, etc. Comes in a cedar wood box and they are available in two types: translucent (extra fine); and hard (fine). Translucent Stone Size 4" x 2" x ½" (102 x 51 x12.7mm) Hard Size 6" x 2" x ½" (152 x 51 x 12.7 mm) Show less (-) |
 |
Each set comes with a MT-1 Handle, instrument case, and 7 tips listed above (no… Show more (+) Each set comes with a MT-1 Handle, instrument case, and 7 tips listed above (no tool #2). Show less (-) |
 |
Boron Carbide is one of the hardest materials known, ranking third behind diamond and cubic… Show more (+) Boron Carbide is one of the hardest materials known, ranking third behind diamond and cubic boron nitride.
- Extreme hardness, (Knoop 100g: 2900-3580 kg/mm2)
- Good chemical resistance
- Good nuclear properties
- Low density (2.52 g/cm2)
Due to the hardness, boron carbide powder is used as an abrasive in polishing and lapping applications.
MSDS Show less (-) |
 |
