.png?strip=all){kind=small}
.png?strip=all){kind=small}
 | Compatibility – Ideal for use with a variety of pipets and pipetters, both manual and electronic.
|
 | |
 | We now offer a complete line of prepared, ready-to-use, high quality staining solutions for all standard staining procedures used by the Biological Staining Commission and the Armed Forces Institute of Pathology.
|
 | |
 | An Anti-Roll (A/R) Device which may be used with all our blade holders. It snaps on or off by a unique magnetic attachment system. Its clear plastic plate which is positioned above the sectioning blade prevents any sample curling. |
 | Choose from swabs that feature an antistatic foam head – or swabs with completely static-free construction. Static-dissipative swabs attract dirt and dust for easy cleaning, while reducing and dissipating static electricity. Antistatic properties will not decay over time. Swabs meet all industry standards and requirements, including ASTM-D257 and Federal test method 4046, standard #101C. |
 | Buffer for diluting your primary and secondary antibodies |
 | This ready-to-use Antibody Dilution Buffer is designed for the dilution of antibodies in all immunoassays, including immunofluorescence, IHC, ELISA, WB. This buffer contains immunoglobulin free BSA and does not contain phosphate, sodium azide, or mercury preservatives. It can be used for the dilution of all antibodies, including peroxidase, and antibodies to phophoproteins. However, it is not suitable for dilution of antibodies to S100 proteins. This buffer contains green food color. Reagent Supplied: Ready to use buffer Application: Dilute antibodies, primary or secondary as recommended in the protocol by the manufacturer of these products. Storage: 2-8°C. Diluted antibodies can be stored at 2-8°C for several weeks, depending upon the stability of antibodies. |
 | Well-designed Economy antistatic TEM grid box with a capacity of 100 the standard 3.05mm TEM grids. Ideal for long term storage. Body with the 100 storage cavities is made of blue ABS with a clear acrylic sliding lid. Positions are referenced with numbers and letters, clearly printed on the body. The sliding lid has also 5 positions printed on the inside to enable easy location. Wider spacing of the cavities prevent confusion when loading and make retrieval easier. Dimensions of the EM-Tec TGB-100 TEM grid box are: 92 x 55 x 7mm. See our video o our channel YouTube "Microscopy Direct" |
 | For holding aperture discs or strips while flaming. Small discs can be flamed in the 3/16" diameter cup made from 6 mil platinum foil with a 1/32" diameter hole in the bottom to induce a good flow of air. The cup is attached by a 30 mil platinum wire to a heat resistant handle. The aperture can be hung from the hook for flaming c. |
Filtre par catégorie
Filtres Trier les résultats
Rafraîchir Appliquer
