.png?strip=all){kind=small}
.png?strip=all){kind=small}
 | |
 | Citifluor develop Antifadent Solutions that aid issues with Photobleaching in Fluorescence Microscopy thus reducing fading of Fluorescence of Fluorochromes. D |
 | This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount® medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers. - Clear seal with drying time is less than 24 hours - Refractive index is 1.42 – Viscosity is 90 cPs. Technical Data Sheet s |
 | |
 | Description: This buffer is intended for heat-induced antigen retriever on formalin-fixed paraffin-embedded (FFPE) tissue sections prior to application of antibodies. In IHC most commonly used fixative like formalin mask tissue antigens (cellular, membrane and nuclear) by cross-linking process, this results in poor or no staining in IHC. The use of this buffer on FFPE tissue section improves accessibility of antibodies to tissue antigens.
Storage: 2-8°C. DO NOT FREEZE
Intended Use: 1x buffer solution is intended for heat-induced antigen retriever in IHC. Please refer to primary antibody protocol.
Reagent: 10x, pH 6 antigen retriever solution.
Preparation of Working Solution:Dilute this 10x buffer as needed (e.g. 90 ml of deionized or distilled water + 10 ml of this buffer), mix well, 1x buffer can be stored at 2-8°C
MSDS |
 | citric acid anhydrous ACS Unit : 500g d |
 |
|
 | CLEAR Laser Tough-Tag® 1.05" x 0.50" (27 mm x 13 mm) |
| CLEAR Laser Tough-Tag® 1.50" x 0.50" (38 x 13 mm) |
| CLEAR Laser Tough-Tag® 1.50" x 0.75"(38 mm x 19 mm) |
Filtre par catégorie
| |
| Citifluor develop Antifadent Solutions that aid issues with Photobleaching in Fluorescence Microscopy thus reducing fading of Fluorescence of Fluorochromes. D |
| This butyl acetate and acrylic resin mixture is the first mounting medium developed for coverslipping directly from d-limonene based clearants. Superior results are also with xylene. CitraMount® medium is recommended for manual coversliping only as it may cause damage to the valves of automated coverslippers. - Clear seal with drying time is less than 24 hours - Refractive index is 1.42 – Viscosity is 90 cPs. Technical Data Sheet s |
| |
| Description: This buffer is intended for heat-induced antigen retriever on formalin-fixed paraffin-embedded (FFPE) tissue sections prior to application of antibodies. In IHC most commonly used fixative like formalin mask tissue antigens (cellular, membrane and nuclear) by cross-linking process, this results in poor or no staining in IHC. The use of this buffer on FFPE tissue section improves accessibility of antibodies to tissue antigens.
Storage: 2-8°C. DO NOT FREEZE
Intended Use: 1x buffer solution is intended for heat-induced antigen retriever in IHC. Please refer to primary antibody protocol.
Reagent: 10x, pH 6 antigen retriever solution.
Preparation of Working Solution:Dilute this 10x buffer as needed (e.g. 90 ml of deionized or distilled water + 10 ml of this buffer), mix well, 1x buffer can be stored at 2-8°C
MSDS |
| citric acid anhydrous ACS Unit : 500g d |
|
|
| CLEAR Laser Tough-Tag® 1.05" x 0.50" (27 mm x 13 mm) |
| CLEAR Laser Tough-Tag® 1.50" x 0.50" (38 x 13 mm) |
| CLEAR Laser Tough-Tag® 1.50" x 0.75"(38 mm x 19 mm) |
