Filtre par catégorie

Category
Sort by Name A - Z
Showing 441 – 450 of 3335 results Showing all 3335 results Showing the single result Aucun résultat trouvé
10 per page
Filtres Trier les résultats
Rafraîchir Appliquer
COL-Aurion Colloidal gold based protein Stain

Col-Aurion is a total protein stain consisting of a solution of coated gold particles with an average particle diameter of 15 nm.

MSDS     Technical Data sheet

Unit : 500 ml  

These 2 part molds may be used for all cold embedding epoxies. Comes with a detached cap for easy removal. The molds come in 3 different sizes to accommodate all of the samples you may have. The molds are made from HDPE and we recommend the use of mold release spray (Catalog #72619) prior to use.
Collodion (Parlodion), 2% in Amyl Acetate

making film support grids

 

d

Collodion, 5% Solution, USP

collodion 5% in solution :   25% Alcohol, 75% Diethyl Ether

d

As an acidic dispersion, Colloidal Alumina is a chemical-mechanical action, that provides superior surfaces on germanium, silicon, gallium arsenide, zinc sulphide, fluorides, sapphire, ferrite's and silicon carbide. Low scatter finishes can be obtained on pure metals such as nickel, tungsten, copper, beryllium, steel and aluminum. Epoxy resin materials and plastics have also been successfully polished with this versatile colloidal dispersion. Properties: pH: 3-3.5; Solids: 20%; Viscosity: thixotropic. Application: Depending upon the application, Colloidal Alumina can be used full strength or diluted. Dilution up to 1:1 or higher with deionized water is recommended. Polyurethane and short nap cloths are recommended. However, most commonly used laps and pads are compatible with colloidal alumina. MSDS
Texte indicatif
Color Coded Dual Tough-Tag®

Ideal Use: 1.5 ml tubes Label size: 1.25" x 0.5625" with 0.44" spot (32 x 14mm with 11mm spot)
Color Coded Tough-Tags will not come off in rotors, cyclers or racks. They are resistant to extreme temperatures and the matte surface is suitable for pencil, pen or marker. Comes in 500 sets per roll (a set is one spot and one rectangular label)

Brochures.pdf

Colormark™ Plus Glass Slide

Specimen Slide identification is VITAL. Automated etched slide labeling instruments ensure specimen slide integrity but are difficult to read on ordinary slides.

A holey carbon film is shadowed with gold and graphitized carbon particles are deposited on a 3.05mm grid. These particles viewed over the holes may be used for assessment of factors limiting the microscope performance. The evaporated gold forms small polycrystalline islands and within these islands lattice fringes can be resolved. Also use this specimen for the measurement of contamination rates in the EM by noting the deposition rate of carbon within the holes found in the gold film.
1444546334
0

Your Cart