.png){kind=small}
.png){kind=small}
holder
99 résultats affichés
-
3-5 Standard for JEOL Temscanv
JEOL Temscan bulk Standard Holder made from plastic; holds 3-5 standards, fitted in a JEOL BR1 holder.
Ref: D80073-04
-
EM-Tec 3V22 triple compact vise sample holder for 3x up to 22mm samples, pin
each
Ref: D12-002400
-
EM-Tec B26 bulk sample holder for up 26mm, aluminium, M4
each
Ref: D12-000325
-
EM-Tec B52 bulk sample holder for up 52mm, aluminium, pin
each
Ref: D12-003252
-
EM-Tec F12 compact FIB grid holder for up to 2 FIB grids, pin
each
Ref: D12-000270
-
EM-Tec GB16 bulk sample holder for up 16mm, gilded brass, M4
each
Ref: D12-000323
-
EM-Tec GR2 needle / tube sample holder for up to Ø2mm, gold plated brass, pin
each
Ref: D12-000117
-
EM-Tec GR20 bulk sample holder for up to Ø20mm, gilded brass, M4
each
Ref: D12-000317
-
EM-Tec GR20 bulk sample holder for up to Ø20mm, gilded brass, pin
each
Ref: D12-000217
-
EM-Tec GS10 swivel head sample holder for up to 10mm, gold plated brass, pin
Ref: D12-000110
-
EM-Tec GS24 gripping stub holder with clamping plate, 0-4mm, aluminium, M4
each
Ref: D12-000334
-
EM-Tec H3 multi stub holder for 3 x Ø15mm Hitachi stubs, Ø25x6mm, M4
each
Ref: D12-000356
-
EM-Tec H45 fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, M4
each
Ref: D12-000341
-
EM-Tec HGS10 swivel head sample holder for up to 10mm, gold plated brass, M4
each
Ref: D12-003110
-
EM-Tec HS15C S-Clip swivel mount sample holder with 1xS-Clip, Ø15mm, M4
each
Ref: D12-004911
-
EM-Tec HS17 mini swivel vise holder for up to 4mm, aluminium, M4
each
Ref: D12-003340
-
EM-Tec HS18 mini swivel split mount vise for up to 8mm, aluminium, M4
each
Ref: D12-003330
-
EM-Tec HS19 swivel clamp for up to 16mm samples, aluminium, M4
each
Ref: D12-003315
-
EM-Tec J4 multi holder for 4 of the JEOL Ø9.5mm sample stubs. Holder size is Ø32x10mm.
each
Ref: D12-000313
-
EM-Tec M32 metallographic mount holder for Ø30mm / Ø32mm / Ø1-1/4inch mounts, M4
each
Ref: D12-000332
-
EM-Tec P36 fixed 36°pre-tilt holder for Zeiss FIB systems, Ø12.7x17mm, pin
each
Ref: D10-002236
-
EM-Tec P38 fixed 38°pre-tilt holder for FEI FIB systems, Ø12.7x17mm, pin
each
Ref: D10-002238
-
EM-Tec P4 multi pin stub holder for 4 pin stubs, Ø31.5×10.5mm, M4
each
Ref: D12-000314
-
EM-Tec P45 fixed 45° pre-tilt holder for pin stubs/holders, Ø12.7x17mm, pin
each
Ref: D10-002245
-
EM-Tec P45M fixed 45° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x17mm, pin
each
Ref: D10-002246
-
EM-Tec P70 EBSD 70° pre-tilt holder for pin stubs/holders, Ø12.7x20mm, pin
each
Ref: D10-002270
-
EM-Tec P70M EBSD 70° pre-tilt holder for Hitachi M4 stubs/holders, Ø12.7x20mm, pin
each
Ref: D10-002274
-
EM-Tec PH90 versatile off-set and 90 degrees sample holder kit
each
Ref: D12-000266
-
EM-Tec PH91 S-Clip 90° Quick-Flip SEM sample holder kit, compatible with pin & M4
each
Ref: D12-003261
-
EM-Tec PH92 mini vise clamp 90° Quick-Flip SEM sample holder kit, compatible with pin & M4
each
Ref: D12-003262
-
EM-Tec PH93 mini split mount vise clamp 90° Quick-Flip SEM sample holder kit, compatible with pin & M4
each
Ref: D12-003263
-
EM-Tec PH94 stub vise clamp 90° Quick-Flip SEM sample holder kit, compatible with pin & M4
each
Ref: D12-003264
-
EM-Tec PS11 mini pin stub grid holder for 1 x TEM grid, Ø12.7×3.2mm, pin
each
Ref: D10-002211
-
EM-Tec PS12 pin stub vise clamp 0-12mm, Ø25×7.2mm, pin
each
Ref: D12-000112
-
EM-Tec PS15C Pin stub swivel mount sample holder with 1xS-Clip, pin
each
Ref: D12-002901
-
EM-Tec PS17 mini swivel vise holder for up to 4mm, aluminium, pin
EM-Tec PS17 mini swivel vise mount to hold samples or cross section up to 4mm thickness. The sample is held by a set screw. Sample can be tilted both ways up to full 90° tilt angle. Holder size w/o pin is Ø12x18mm.
Ref: D12-003240
-
EM-Tec PS44 quad vise stub holder for 4 samples from 0-4mm, pin
each
Ref: D10-002244
-
EM-Tec PS5 pin stub round clamp up to Ø3.5mm, Ø12.7×7.2mm, pin
each
Ref: D10-002213
-
EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7×7.2mm, pin
each
Ref: D10-002218
-
EM-Tec PS6 mini split pin stub vise clamp 0-6mm, Ø12.7×7.2mm, pin
each
Ref: D10-002242
-
EM-Tec R32 bulk sample holder for up to Ø32mm, aluminium, M4
each
Ref: D12-000333
-
EM-Tec S-Clip sample holder with 1x S-Clip on 19mm pin stub
each
Ref: D12-002910
-
EM-Tec S-Clip sample holder with 1x S-Clip on Ø15x10mm stub, M4
each
Ref: D12-004910-1
-
EM-Tec S-Clip sample holder with 1xS-Clip 45° on Ø25.4mm pin stub
each
Ref: D12-002925
-
EM-Tec S-Clip sample holder with 1xS-Clip 45° on Ø25mm stub, M4
each
Ref: D12-004925
-
EM-Tec S-Clip sample holder with 1xS-Clip at 90°, Ø12.7mm, pin
each
Ref: D12-002911
-
EM-Tec S-Clip sample holder with 2xS-Clips 45°/90° on Ø25 stub, M4
each
Ref: D12-004927
-
EM-Tec S-Clip sample holder with 2xS-Clips 45°/90° on Ø25.4mm pin stub
Ref: D12-002927
-
EM-Tec S-Clip sample holder with 2xS-Clips double 90° on Ø25.4mm pin
each
Ref: D12-002929
-
EM-Tec S-Clip sample holder with 2xS-Clips double 90° on Ø25mm stub, M4
each
Ref: D12-004929
-
EM-Tec S-Clip sample holder with 4xS-Clips at 90°, 12.7×12.7x14mm, M4
each
Ref: D12-004914
-
EM-Tec S-Clip sample holder with 4xS-Clips at 90°, 12.7×12.7x14mm, pin
each
Ref: D12-002914
-
EM-Tec S-Clip sample holder with S-Clip(s) on Ø25.4mm pin stub
Ref: D12-002920
Read MoreChoix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
EM-Tec S-Clip sample holder with S-Clip(s) on Ø25x10mm stub, M4
Ref: D12-004920
Read MoreChoix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
EM-Tec S-Clip sample holder with S-Clip(s) on Ø32x10mm stub, M4
Ref: D12-004930
Read MoreChoix des options Ce produit a plusieurs variations. Les options peuvent être choisies sur la page du produit -
EM-Tec SC1 SampleClamp SEM holder, 15x10mm sample area, M4
each
Ref: D12-000308
-
EM-Tec SC2 SampleClamp SEM holder, 25x15mm sample area, M4
each
Ref: D12-000309
-
EM-Tec TV12 mini variable 0-90° angle tilt sample holder 11x12mm, angle indicators at 0, 30, 45, 70 and 90 degrees, M4
each
Ref: D12-000347
-
EM-Tec TV12 mini variable 0-90° angle tilt sample holder 11x12mm, angle indicators at 0, 30, 45, 70 and 90 degrees, pin
EM-Tec TV12 mini variable tilt mount allows 0-90° angle in a small sample mount. The sample needs to be mounted on the tilting platform of this compact holder. Side engravings on the tilting platform assist in setting the desired tilt angle. Practical holder to examine sample under an angle.
Ref: D12-000241
-
EM-Tec TV12C mini variable 0-90° angle tilt sample holder with 1 x S-Clip, angle indicators at 0, 30, 45, 70 and 90°, M4
each
Ref: D12-004947
-
EM-Tec TV12C mini variable 0-90° angle tilt sample holder with 1 x S-Clip, angle indicators at 0, 30, 45, 70 and 90°, pin
each
Ref: D12-002941
-
EM-Tec TV25 variable 0-90° angle tilt holder for stubs up Ø38mm, M4
each
Ref: D12-000348
-
EM-Tec V120 versatile vise clamp sample holder for up to 120mm, M4 More Info
each
Ref: D12-000305
-
EM-Tec V120 versatile vise clamp sample holder for up to 120mm, pin More Images
each
Ref: D12-000205
-
EM-Tec V120 versatile vise clamp sample holder for up to 120mm, Ø14mm JEOL stub
each
Ref: D12-000605
-
EM-Tec V22 compact vise type sample holder for up to 22mm, M4
each
Ref: D12-000300
-
EM-Tec V80 versatile vise clamp sample holder for up to 80mm, M4 More Info
each
Ref: D12-000303
-
EM-Tec V80 versatile vise clamp sample holder for up to 80mm, pin More Images
each
Ref: D12-000203
-
EM-Tec Versa-Plate H121 SEM sample holder 150x150mm with 121 M4 threaded holes and 5 brackets, pin
each
Ref: D12-003290
-
EM-Tec Versa-Plate H121 SEM sample holder 150x150mm with 121 M4 threaded holes and 5 brackets, Ø14 mm JEOL stub
each
Ref: D12-006290
-
EM-Tec Versa-Plate H121 SEM sample holder 150x150mm with 121 M4 threaded holes and 5 x S25 brackets, M4
each
Ref: D12-003390
-
EM-Tec Versa-Plate H45 SEM sample holder 106x58mm with 45 M4 threaded holes and 4 x S25 brackets, M4
each
Ref: D12-003384
-
EM-Tec Versa-Plate H45 SEM sample holder 106x58mm with 45 M4 threaded holes and 4 x S25 brackets, pin
each
Ref: D12-003284
-
EM-Tec Versa-Plate H45 SEM sample holder 106x58mm with 45 M4 threaded holes and 4 x S25 brackets, Ø14 mm JEOL stub
each
Ref: D12-006284
-
EM-Tec Versa-Plate H49 SEM sample holder 82x82mm with 49 M4 threaded holes and 4 x S25 brackets, M4
each
Ref: D12-003386
-
EM-Tec Versa-Plate H49 SEM sample holder 82x82mm with 49 M4 threaded holes and 4 x S25 brackets, Ø14 mm JEOL stub
each
Ref: D12-006286
-
EM-Tec Versa-Plate H81 SEM sample holder 106x106mm with 81 M4 threaded holes and 4 x S25 brackets, M4
each
Ref: D12-003388
-
EM-Tec Versa-Plate H81 SEM sample holder 106x106mm with 81 M4 threaded holes and 4 x S25 brackets, pin
each
Ref: D12-003288
-
EM-Tec Versa-Plate H81 SEM sample holder 106x106mm with 81 M4 threaded holes and 4 x S25 brackets, Ø14 mm JEOL stub
each
Ref: D12-006288
-
EM-Tec VS12 compact single action spring-loaded vise holder for up to 12mm, M4
each
Ref: D12-000321
-
EM-Tec VS26 compact double action spring-loaded vise holder for up to 26mm, M4
each
Ref: D12-000322
-
EM-Tec VS42 universal spring-loaded large vise holder for up to 42mm, pin
each
Ref: D12-000220
-
EM-Tec W2 wafer holder for Ø51mm / 2inch wafers, M4
each
Ref: D12-000382
-
EM-Tec W2 wafer holder for Ø51mm / 2inch wafers, pin
each
Ref: D12-000282
-
EM-Tec W3 wafer holder for Ø76mm / 3 inch wafers, M4
each
Ref: D12-000393
-
EM-Tec W3 wafer holder for Ø76mm / 3 inch wafers, pin
each
Ref: D12-000293
-
EM-Tec W4 wafer holder for Ø100mm / 4 inch wafers, Ø14mm JEOL stub
each
Ref: D12-000684
-
EM-Tec W4 wafer holder for Ø100mm / 4inch wafers, M4
each
Ref: D12-000384
-
EM-Tec W6 wafer holder for Ø150mm / 6inch wafers, M4
each
Ref: D12-000386
-
EM-Tec W6 wafer holder for Ø150mm / 6inch wafers, pin
each
Ref: D12-000286
-
EM-Tec W6 wafer holder for Ø150mm / 6inch wafers, Ø14mm JEOL stub
each
Ref: D12-000686
-
EM-Tec W8 wafer holder for Ø200mm / 8inch wafers, M4
each
Ref: D12-000388
-
EM-Tec W8 wafer holder for Ø200mm / 8inch wafers, pin
each
Ref: D12-000288
-
EM-Tec W8 wafer holder for Ø200mm / 8inch wafers, Ø14mm JEOL stub
each
Ref: D12-000688
-
EM-Tec XL100 multi holder for large SEM sample stubs or SEM sample holders with either M4 hole or pin, M4
each
Ref: D12-000381
-
Phenom PH22 bulk holder up to Ø22x12mm for Phenom metallurgical sample holder
each
Ref: D12-003233
-
Phenom PH32 vise clamp up to 22mm thick for Phenom metallurgical sample holder
each
Ref: D12-003236
-
Phenom PHF32 filter holder kit with support block and clamping ring for Phenom metallurgical sample holder
Phenom PHF32 filter holder kit to examine paper or plastic filters with the Phenom Pure, Pro and ProX table top SEMs. Fully compatible with the Phenom metallurgical sample holder and the Phenom charge reduction metallurgical sample holder. The Phenom PHF32 consists of a flat Ø32×0.5mm aluminium washer with an opening size of Ø22mm and a Ø32x10mm aluminium stub. The filter is to be placed between the washer and the stub and then loaded into the Phenom metallurgical holder for examination.
Ref: D12-003222
-
Tweezers Storage Holder
Ref: DP01
