.png){kind=small}
.png){kind=small}
phenom
8 résultats affichés
-
EM-Tec 12.AM scissor type short handle SEM pin stub gripper for Ø12.7mm pin stubs, anti-magnetic stainless steel
each
Ref: D50-050013
-
EM-Tec 127G.AM SEM pin stub gripper tweezers for Ø12.7mm pin stubs, anti-magnetic stainless steel
each
Ref: D50-050012
-
EM-Tec 254G.AM SEM pin stub gripper tweezers for Ø25.4mm pin stubs, anti-magnetic stainless steel
each
Ref: D50-050025
-
EM-Tec PH6 XL mounting pillars for Phenom XL pin plate
each
Ref: D12-003206
-
Phenom PH22 bulk holder up to Ø22x12mm for Phenom metallurgical sample holder
each
Ref: D12-003233
-
Phenom PH32 vise clamp up to 22mm thick for Phenom metallurgical sample holder
each
Ref: D12-003236
-
Phenom PHA32 adapter ring to hold 25mm/1 inch diameter mounts in the Phenom metallurgical holder
each
Ref: D11-000632
-
Phenom PHF32 filter holder kit with support block and clamping ring for Phenom metallurgical sample holder
Phenom PHF32 filter holder kit to examine paper or plastic filters with the Phenom Pure, Pro and ProX table top SEMs. Fully compatible with the Phenom metallurgical sample holder and the Phenom charge reduction metallurgical sample holder. The Phenom PHF32 consists of a flat Ø32×0.5mm aluminium washer with an opening size of Ø22mm and a Ø32x10mm aluminium stub. The filter is to be placed between the washer and the stub and then loaded into the Phenom metallurgical holder for examination.
Ref: D12-003222
