.png?strip=all&lossy=1&ssl=1){kind=small}
.png?strip=all&lossy=1&ssl=1){kind=small}
Affichage de 151–300 sur 1303 résultats
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
EMS Embedding Mold is a new mold designed with Michael J. Dykstra Ph.D. from… Show more (+) EMS Embedding Mold is a new mold designed with Michael J. Dykstra Ph.D. from North Carolina State University Department of Veterinary Medicine. This Mold produces blocks of the best dimension to be held securely by Reichert/Leica Ultracut stepped microtome chucks. There are 24 cavities and the depth of each cavity is 4mm which will prevent breakage of the blocks during razor blade trimming.Mold Measurements: 3⅜" x 3" (85 x 77 mm)Cavity Measurements: 15 mm x 7 mm x 4 mm Deep Show less (-) |
 |
Storage : 4-8°C MSDS Technical Data Sheet : Ultra small gold reagent |
 |
Very low viscosity; monomeric styrene which penetrates rapidly into the tissues. It is soluble in… Show more (+) Very low viscosity; monomeric styrene which penetrates rapidly into the tissues. It is soluble in ethanol and acetone. The infiltration and embedding can be done by styrene alone, and there is no need to dilute it with solvents. Polymerization can be done either by UV light (340-400nm) or heat (60°C) within 2-3 days without benzoyl peroxide added; 24 hours with 1% benzoyl peroxide added as a catalyst.
Delamater et al., (1971) Pro. 29th Ann. Meet. EMSA, p. 488. Claitor's Pub. Div., Baton Rouge, La.
Kushida, H. (1962b) J. Electron Microsc., 11:128
Kushida, H. (1961a) J. Electron Microsc., 10:16
MSDS
Technical Data Sheet : Styrene Monomer Polyester Resin Embedding
Storage : RT
Unit : kit Show less (-) |
|
Unit : 450 ml |
 |
Unit : Pint |
|
Unit : 100g |
|
Unit : 500g |
|
(Solvent Black 3)
C29H24N6 M.W. 456.56 CAS #4197-25-5
Solubility: Water-insoluble; Alcohol-soluble; 4.0%… Show more (+) (Solvent Black 3)
C29H24N6 M.W. 456.56 CAS #4197-25-5
Solubility: Water-insoluble; Alcohol-soluble; 4.0% Cellosolve; 1.0% Glycol.
MSDS
Storage : RT
Unit : 25g Show less (-) |
 |
Epoxy resins are easier to section with glass, as well as diamond knives, when the… Show more (+) Epoxy resins are easier to section with glass, as well as diamond knives, when the embedding medium contains 0.5-1.0% of our SURE-CUT. The life of the diamond knife will be extended with its use because it will reduce the friction of the plastic block during sectioning. Unit : 50g Show less (-) |
 |
Same as the Kwik Gard™, but in its original container. A two-part silicone elastomer, ideal… Show more (+) Same as the Kwik Gard™, but in its original container. A two-part silicone elastomer, ideal for potting and encapsulating applications. Very low dielectric constant sealing compound used in patch clamping and many other lab applications. After cure, will withstand -55° to 200 °C. Curing time for this silicone 24hrs @ 25°C, and 15 min. @ 150°C.
Unit : kit Show less (-) |
