.png){kind=small}
.png){kind=small}
12 résultats affichés
Filtres Trier les résultats
Rafraîchir Appliquer
 | Unit : 450 ml | ||||||||||
 | (Propylene glycol monomethacrylate) C7H12O3 F.W. 144.17 CAS #27813-02-1 b.p. 70°C/1mmHg Specific Gravity @25°C 1.028 Solubility in Water 13% Inhibited with approx. 300ppm MEHQ A water miscible monomer Storage : 0-5°C MSDS | ||||||||||
 | |||||||||||
 | Please see Durcupan (Water Soluble) listing in Embedding Media Kits for more information ( #D14020) Storage : RT MSDS_14020-A MSDS_14020-B | ||||||||||
 | Please see Durcupan (Water Soluble) listing in Embedding Media Kits for more information ( #D14040) Storage : RT MSDS_14041-A MSDS_14042-B | ||||||||||
 | Please see listing in Embedding Media Kits.
Kit consists of :
| ||||||||||
| Please see listing in Embedding Media Kits.
Storage : RT
Unit : Kit
Technical Data Sheet | ||||||||||
| The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing. This pre-mixed, ready to use resin, saves you time and minimizes chemical contact. MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling. Store at room temperature.
MSDS_14335
MSDS_14345
Storage : RT | ||||||||||
| Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.
The K4M kit is usable to -35°C and is a polar (hydrophilic) medium, while the HM20 kit can be used down to -70°C and is nonpolar (hydrophobic).
Lowicryl's K11M and HM23 have properties similar to K4M and HM20, but can be used at temperatures 20 degrees lower than others: K11M at -60°C, HM23 at least -80°C. All of these resins are photopolymerized by long wavelength (360nm) ultraviolet light. Since the initiation of the polymerization is largely independent of temperatures, blocks may be polymerized at the same temperatures used for infiltration. The resin may also be chemically polymerized at 60°C.
Armbruster, B.L. et al, (1982). J. Microscopy 126: 77
Carlemalm, E. et al, (1985). J. Microscopy 140:55
Hayat, M.A. (Ed.). (1989) Priciples and Techniques of Electron Microscopy, 3rd Edition. CRC Press,Inc. Boca Raton, Florida. | ||||||||||
| The London Resin Company's acrylic "LR Gold" offers the histochemist and immunocytochemist the advantage of working with unfixed tissues at low temperatures, thus allowing many fixation-sensitive procedures to be carried out in 1-4 microns resin sections at -25°C using visible light. It is non-toxic and has a low viscosity. |
12
