.png){kind=small}
.png){kind=small}
Affichage de 1–150 sur 164 résultats
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
This acetate film soften in acetone and can be used for duplicating purposes. Acetate film… Show more (+) This acetate film soften in acetone and can be used for duplicating purposes. Acetate film which is wet with acetone can then be applied to a surface which has been wet with acetone. It is easily removed away from the object when dry. Acetate films come in 35µm thickness.
Technical Data Sheet Show less (-) |
 |
These 2 part molds may be used for all cold embedding epoxies. Comes with a… Show more (+) These 2 part molds may be used for all cold embedding epoxies. Comes with a detached cap for easy removal. The molds come in 3 different sizes to accommodate all of the samples you may have. The molds are made from HDPE and we recommend the use of mold release spray (Catalog #72619) prior to use. Show less (-) |
 |
Cold mounting or embedding is when a resin is mixed with a hardener (or accelerator)… Show more (+) Cold mounting or embedding is when a resin is mixed with a hardener (or accelerator) to provide the mounting compound, and then the polymerization process take place to form the block. In some cases, this process gives-off heat. However this heat generation can be controlled by the use of ice or cool air blow setting. […] Show less (-) |
 |
As an acidic dispersion, Colloidal Alumina is a chemical-mechanical action, that provides superior surfaces on… Show more (+) As an acidic dispersion, Colloidal Alumina is a chemical-mechanical action, that provides superior surfaces on germanium, silicon, gallium arsenide, zinc sulphide, fluorides, sapphire, ferrite's and silicon carbide. Low scatter finishes can be obtained on pure metals such as nickel, tungsten, copper, beryllium, steel and aluminum. Epoxy resin materials and plastics have also been successfully polished with this versatile colloidal dispersion.
Properties: pH: 3-3.5; Solids: 20%; Viscosity: thixotropic.
Application: Depending upon the application, Colloidal Alumina can be used full strength or diluted. Dilution up to 1:1 or higher with deionized water is recommended. Polyurethane and short nap cloths are recommended. However, most commonly used laps and pads are compatible with colloidal alumina.
MSDS Show less (-) |
 |
This non-crystallizing Colloidal Silica is made to be user friendly. It eliminates the problems that… Show more (+) This non-crystallizing Colloidal Silica is made to be user friendly. It eliminates the problems that are caused by drying or freezing that are associated with other colloidal silica products which are used for chemical/mechanical polishing. Colloidal silica is a first choice silica dispersion for optimizing polishing results such as silicon, fused quartz, fused silica, lithium […] Show less (-) |
 |
|
|
The same as 509 but used in applications where it is desirable to have a… Show more (+) The same as 509 but used in applications where it is desirable to have a temporary bond which is water soluble. Each stick weighs about 90 grams. Show less (-) |
|
The same as 509 but used in applications where it is desirable to have a… Show more (+) The same as 509 but used in applications where it is desirable to have a temporary bond which is water soluble. Each stick weighs about 90 grams. Show less (-) |
 |
Dialok Diamond Discs consists of a flat, stainless steel backing with sharp, blocky diamond particles… Show more (+) Dialok Diamond Discs consists of a flat, stainless steel backing with sharp, blocky diamond particles electroformed onto the disc. The special hard nickel alloy that is used in Dialok is bonded rigidly and it locks the diamond particles in the disc thus providing fast cutting of all hard materials. The sharp particles cut cleanly with no edge rounding. The discs are supplied with pressure sensitive adhesive backing (PSA).
8" (203 mm) (PSA) xN/H; Full Coat Show less (-) |
|
A selective diamond particle resin bonded to a uniform 3-mil polyester film backing. Excellent for… Show more (+) A selective diamond particle resin bonded to a uniform 3-mil polyester film backing. Excellent for polishing samples with differing hardness. Ideal for the preparation of cross sections for SEM/TEM analysis. Comes in 8" and 12" discs with plain back (P/B) or pressure sensitive adhesive back (PSA).
Unit : each Show less (-) |
