Sort by Name A - Z
Showing 1 – 10 of 14 results Showing all 14 results Showing the single result Aucun résultat trouvé
10 per page
Filtres Trier les résultats
Rafraîchir Appliquer
Beem Embedding Capsules, Size 00, 8mm I.D.

Polyethylene embedding capsules with 1x1mm face at the tip of a truncated pyramid, each with a hinged cap.

BEEM® Block Storage

A two tone color coded plastic box with insert, which allows for the storage of up to 10 blocks in the numbered cavities. Measures: 2⅓" (L) x 1¾" (W) x ½" (H) 57 x 45 x 12.5 mm

BEEM® Capsule Holders

These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation.

Use the clear if microwaving or UV polymerizing your embedding media. Made from Polypropylene.

Available in two sizes: one holds size "00", conical, and bottle neck capsules; the other holds size #3 capsules. Available in white or clear.

Size "00" Measures 5½" (L) x 4" (W) x ⅞" (H), 138 x 100 x 22mm
Size "3" Measures 4¼" (L) x 2⅞" (W) x ⅝" (H), 107 x 72 x 15mm

BEEM® Embedding Capsules Special Shapes

These capsules, made from polyethylene, produce blocks with a 5.6mm O.D. and a pyramid tip. Comes complete with a hinged cap.

BEEM® Embedding Capsules Special Shapes

Available in two specially shaped capsules which are designed to overcome commonly encountered embedding problems; such as, small or thin elongated specimens and powder samples. These capsules are also good for centrifuging precipitated matters and allows for less trimming.

The bottle neck capsule produces a 7.9mm OD block with a hemihyperpoloid (rather than faced) tip.

The conical capsule produces a 7.9mm OD block with a conical (rather than faced) tip

BEEM® Specimen Block Storage System 2000®

Are your bench-tops and drawers crowded with petri dishes and pillboxes full of various sized specimen blocks?
Have you been spent hours to look for a block for re-sectioning?
Do you wish you could neatly catalog, file and store all of those blocks in one convenient place?

BEEM® Specimen Block Storage System arrow12

Capsules; Gelatin

Natural, hard gelatin capsules. To be used as an embedding mold for water miscible resins, or resins which need to be cured by transmitted light. Gelatin capsules dissolve or disintegrate within 5 minutes when immersed in a 0.5% HCl solution at 36-38°C, within 2 minutes in water at 37°C or in artificial gastric juice.

Easy-Model

A newly designed mold which is convenient and offers better embedments. This tray-and-mold in one unit offers a unique specimen block that no other mold can.

EM5 Embedding Molds

Introducing the EM5 - an innovative new design based on the widely used Ø8 mm size embedding mold. The unique two part design allows for easy removal of resin blocks, as well as incorporating many other advantages over currently available embedding products.

Embedding Capsule Holder

These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation.

Use the clear if microwaving or UV polymerizing your embedding media. Made from Polypropylene.

Available in two sizes: one holds size "00", conical, and bottle neck capsules; the other holds size #3 capsules. Available in white or clear.

Size "00" Measures 5½" (L) x 4" (W) x ⅞" (H), 138 x 100 x 22mm
Size "3" Measures 4¼" (L) x 2⅞" (W) x ⅝" (H), 107 x 72 x 15mm

12
0

Your Cart