.png?strip=all){kind=small}
.png?strip=all){kind=small}
Filtres Trier les résultats
Rafraîchir Appliquer
 | |
 | |
 | |
 | Our EMS Square Face Mold features a wider tip area, which is perfect for embedding larger specimens with less resin, resulting in a larger initial section. Once solidified, the block can be glued to the end of a plexiglas rod or other holding device. Material: Blue silicone rubber |
 | EMS-Mount is a non-permanent, low viscosity an aqueous mounting medium designed for mounting of tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents. This mounting medium preserves Fast red, Aminoethylycarbazole (AEC), BCIP/NBT, BCIP/INT chromogens and is also compatible with counterstain like Hematoxylin and Nuclear fast red (NFR). It is also suitable for chromogens like DAB and DAB with nickel and cobalt. (It is not compatible with H and E staining).
Application: Mounting of chromogens that cannot be dehydrated with organic solvents.
Reagent: Ready to use mounting medium.
Storage: 2-8°C is recommended.
MSDS_17985-05
TDS_EMS_Mount |
 | |
 | Cryogenics Liquid Nitrogen Transfer Vessels
Thermo-Flask provides safe extended temperature retention for specimens stored in liquid nitrogen or solid CO2, and thus have a broad range of applications in industrial, educational, and clinical fields.
Thermo-Flask features borosilicate glass inner liners which have been evacuate to 1x10-5 mm of Hg to provide maximum coolant retention.
Example of Possible Retention Times at 80% Full Liquid Nitrogen Retention: |
 | We offer a comprehensive choice of standard pin stubs to support virtually all applications. The standard SEM pin stubs are compatible with Thermo Fisher, FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs. They are made from vacuum grade aluminium. They are machined according to the original manufacturer's specifications and dimensions. The flat pin stubs from 12.7mm to 38mm diameter are grooved for easy and clean handling. The most used pin stubs are the Ø12.7 mm and the Ø25.4 mm pin stubs. Pins are all 3.2mm diameter with a length of either 8mm or 9.5mm. The Ø12.7 mm pin stubs are also available in brass, copper and high purity carbon. |
 | |
 | We offer a comprehensive choice of standard pin stubs to support virtually all applications. The standard SEM pin stubs are compatible with Thermo Fisher, FEI, Philips, Tescan, Phenom, Aspex, RJLee, AmRay, Cambridge Instruments, Leica, CamScan, Aspex, ETEC and Novascan SEMs. They are made from vacuum grade aluminium. They are machined according to the original manufacturer's specifications and dimensions. The flat pin stubs from 12.7mm to 38mm diameter are grooved for easy and clean handling. The most used pin stubs are the Ø12.7 mm and the Ø25.4 mm pin stubs. Pins are all 3.2mm diameter with a length of either 8mm or 9.5mm. The Ø12.7 mm pin stubs are also available in brass, copper and high purity carbon. |
