.png?strip=all){kind=small}
.png?strip=all){kind=small}
Filtres Trier les résultats
Rafraîchir Appliquer
 | |
 | |
 | The SEM pin stubs for the Zeiss and LEO SEMs, CrossBeams or SEM/FIB systems use a 6mm short pin. The pin diameter for all Zeiss SEM pin stubs is 3.2mm (1/8'') diameter. They are made from high quality, vacuum grade aluminium. The Zeiss SEM pin stubs are manufactured according to original specifications for the pin stubs and additional style are added to enable a wide range of applications. The most popular Zeiss pin stubs are the pin stubs with the 12.7 and 25.4mm top diameter. Most of the flat Zeiss SEM pin stubs have a 3.2mm platform height and a groove to enable easy holding and handling |
 | |
 | The SEM pin stubs for the Zeiss and LEO SEMs, CrossBeams or SEM/FIB systems use a 6mm short pin. The pin diameter for all Zeiss SEM pin stubs is 3.2mm (1/8'') diameter. They are made from high quality, vacuum grade aluminium. The Zeiss SEM pin stubs are manufactured according to original specifications for the pin stubs and additional style are added to enable a wide range of applications. The most popular Zeiss pin stubs are the pin stubs with the 12.7 and 25.4mm top diameter. Most of the flat Zeiss SEM pin stubs have a 3.2mm platform height and a groove to enable easy holding and handling |
 | Permanently be able to mark all of your important tools and samples. The Engraver comes with a Battery Pack and is operated on two "AA" Batteries Our EMS Engraver Engraves Test Tubes, Bottles, Racks, Keys etc as well as anything made from glass, metal, stone as well as bone. Engravings are permanent and will not disappear in the presence of chemicals and solvents. The Engraver is 7" in Height ( 17.8cm). We offer a Stand for the EMS Engraver that is made from polypropylene and it measures (3½ x 3⅜") |
 | Les filtres à brouillard d'huile EM-Tec sont utiles pour éliminer ou réduire les brouillards d'huile émis par les pompes à vide rotatives à un ou deux étages. Ils peuvent être utilisés pour des pompes d’une capacité allant de 1 à 12 m3/h. Ils sont compatibles avec les pompes à vide rotatives utilisées pour les équipements de laboratoire tels que les SEM, les spectromètres de masse, les coucheuses par pulvérisation cathodique, les petits fours à vide et les systèmes de séchage. |
 | (A rapid mounting media for microscopy.)
For long life preparations, without bubble formation at high ambient temperatures. It can be used for all dehydrated microscopic preparations. Cure time is 20 minutes at room temperature. It is colorless with an acid number less than 2.50 and a R.I. ND20 approx 1.49-1.5. (Contains xylene).
Storage : RT
Technical Data Sheet
MSDS_14800
|
 | |
 |
