Apiezon Grease; Type H

Type H grease is designed for high temperatures (-10 to +240°C) in a wide range of applications in both science and industry. With good “friction”, grease H is ideal for use with laboratory glassware, but combined with properties of high thermal conductivity, it is the perfect choice for the electronics and space industries where heat sink media require adhesion.
Grease H is a filled hydrocarbon which exhibits excellent thermal conductivity, and strong absorption properties. The capability to absorb greasy or chemical impurities on metal and glass surfaces is a value “tool” required by electronic industries.

MSDS

 

REF: D60703 Categories: ,

Description

Excellent lubricants
High purity, low vapor pressure – non-contamination in analysis
The working temperature range of each grease is dependent on the grade that is used
Easily applied, easily cleaned off
Silicone free. This benefits scientific users because the risk of sample contamination and consequently the risk of interference in analytical techniques such as infra-red or mass spctrometry, etc. is avoided
Approved by NASA and NATO

Typical Property AP101 AP100 H L M N T
Main area of application General Lubricating Cryogenic High Temp High Vacuum General Vacuum Medium Temp
Melting Point: °C
ASTM.D 566  °F

>200
>392

42-52
108-126
does not melt 42-52
108-126
40-60
104-140
42-52
108-126
112-137
233-278
Working temp. range -40-180
-40-365
10-30
50-86
-10-240
14-464
10-30
50-86
10-30
50-86
-269-30
-452-86
10-120
50-248
Vapor Pressure
Torr @20°C
<1.0×10-5 7.0×10-11 1.7×10-9 7×10-11 1.7×10-9 6×10-10 4.6×10-9
Relative Density 20°C 0.981 1.042 0.918 0.896 0.894 0.911 0.912
Radiation Resistance No No No Yes Yes No No
Outgassing
Characteristics  TML
ASTMS .E         CVCM
595-90
/
/
<1.0%
<0.1%
<1.0%
<0.1%
/
/
<1.0%
<0.1%
/
/
/
/
Lubricity 4 Ball Test
ASTM .D 2763
(IP 239), Kg
450 450 250 150 140 150 /
Viscosity of molten
grease, cP
50°C
100°C
/
/
/
/
/
/
766
62.3
413
29.8
Coefficient of
expansion per °C
over 20°C-30°C
0.00066 / / 0.00076 0.00075 0.00072 0.00073
Thermal conductivity,
w/m°C
/
/
/
/
/
/
0.216
/
0.194
/
0.194
0.095
/
/
Latent heat of fusion,
cal/g
/ / / 15.1 18.7 15.0 /
Fusion Peak °C / / 25 32 34 31 *
Vol. resistivity, cm / / / 1.2×1016 2.6×1016 2.0×1016 3.3×1016
Permittivity / / / 2.3 2.1 2.3 2.3
Loss tangent / / / <0.0001 <0.0001 <0.0001 <0.0001
Surface breakdown
at flash over, kV
/ / / 24 28 27 24
Electric strength, V / / / 730 850 820 730

* Too close to room temperature to measure.

PDF

Informations complémentaires

Unit

25g/tube

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “Apiezon Grease; Type H”

Votre adresse e-mail ne sera pas publiée.

0

Your Cart