.png){kind=small}
.png){kind=small}
Affichage de 151–300 sur 323 résultats
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
JEOL 100CX Standard Holder in brass for use in the STEM mode. Holds up to… Show more (+) JEOL 100CX Standard Holder in brass for use in the STEM mode. Holds up to 7 standards of your choice. Show less (-) |
 |
NIOPROBE The Nioprobe device is used to determine the shape at the very apex of… Show more (+) NIOPROBE The Nioprobe device is used to determine the shape at the very apex of the tip probe for microscopy. The Problem The physical probe used in AFM imaging is not ideally sharp. As a consequence, an AFM image does not reflect the true sample topography impartially, but rather represents the interaction of the tip […] Show less (-) |
 |
TIPCHECK The Tipcheck device is used for examining the shaft of the tip probe or… Show more (+) TIPCHECK The Tipcheck device is used for examining the shaft of the tip probe or for determining the tip breakage etc. The Problem When imaging a new sample in an AFM, it may be difficult to know whether one has obtained an accurate representation of the surface. Even in the case that a fairly clear […] Show less (-) |
 |
A multipurpose anti-static foaming cleaner. Ideal for general cleaning on a wide variety of Laboratory… Show more (+) A multipurpose anti-static foaming cleaner. Ideal for general cleaning on a wide variety of Laboratory, industrial, aerospace and commercial equipment. Removes tough, stubborn stains such as grease, grime, and dirt Anti-static formulation, reduces the attraction of airborne dust Show less (-) |
 |
For holding aperture discs or strips while flaming. Small discs can be flamed in the… Show more (+) For holding aperture discs or strips while flaming. Small discs can be flamed in the 3/16" diameter cup made from 6 mil platinum foil with a 1/32" diameter hole in the bottom to induce a good flow of air.The cup is attached by a 30 mil platinum wire to a heat resistant handle. The aperture can be hung from the hook for flamingc. Show less (-) |
 |
PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper… Show more (+) PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper operating temperature of 250°C and vapor pressure of 1.3 x 10-12 at 25°C, it is robust, versatile and can be used for sealing and lubricating under the most extreme operating conditions. This includes environments where aggressive chemicals and strong oxidising agents are regularly used.
MSDS Show less (-) |
 |
Apiezon AP100 Grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely… Show more (+) Apiezon AP100 Grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases.
Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate.
MSDS Show less (-) |
|
Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety… Show more (+) Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications.
MSDS Show less (-) |
 |
Type H grease is designed for high temperatures (-10 to +240°C) in a wide range… Show more (+) Type H grease is designed for high temperatures (-10 to +240°C) in a wide range of applications in both science and industry. With good "friction", grease H is ideal for use with laboratory glassware, but combined with properties of high thermal conductivity, it is the perfect choice for the electronics and space industries where heat sink media require adhesion.
Grease H is a filled hydrocarbon which exhibits excellent thermal conductivity, and strong absorption properties. The capability to absorb greasy or chemical impurities on metal and glass surfaces is a value "tool" required by electronic industries.
MSDS
Show less (-) |
|
Grease L is a petroleum hydrocarbon grease, containing no additives. Very low vapor pressure (@20°C… Show more (+) Grease L is a petroleum hydrocarbon grease, containing no additives. Very low vapor pressure (@20°C of 8x10-11 torr), high vacuum grade. Type L is widely used in the stationary phase of gas liquid chromatography, and may be used on all ground joints in a vacuum system (not for stopcocks). Its solubility is as follows: in Ethanol at 20°C-0.003%; 60°C-0.005%; 100°C-0.011%; 150°C-0.011%. Grease L softens and melts at about 47°C and it is not recommended for joints where temperatures exceed more than 30°C in use. Grease T is recommended for these higher temperatures.
MSDS
Technical data sheet
Show less (-) |
