82 résultats affichés

Category
Sort by Name A - Z
Showing 1 – 10 of 82 results Showing all 82 results Showing the single result Aucun résultat trouvé
10 per page
Filtres Trier les résultats
Rafraîchir Appliquer
Manufactured from pure "PTFE", (Teflon) chemically inert and usable to 280°C 5  ,  25  , …
Show more (+)
Manufactured from pure "PTFE", (Teflon) chemically inert and usable to 280°C 5  ,  25  ,  75  ,  100 ml or cc a
Show less (-)
A multipurpose anti-static foaming cleaner. Ideal for general cleaning on a wide variety of Laboratory…
Show more (+)
A multipurpose anti-static foaming cleaner. Ideal for general cleaning on a wide variety of Laboratory, industrial, aerospace and commercial equipment. Removes tough, stubborn stains such as grease, grime, and dirt Anti-static formulation, reduces the attraction of airborne dust
Show less (-)
PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper…
Show more (+)
PFPE 501 is a chemically inert, high temperature and extreme pressure lubricant. With an upper operating temperature of 250°C and vapor pressure of 1.3 x 10-12 at 25°C, it is robust, versatile and can be used for sealing and lubricating under the most extreme operating conditions. This includes environments where aggressive chemicals and strong oxidising agents are regularly used. MSDS
Show less (-)
Apiezon AP100 Grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely…
Show more (+)
Apiezon AP100 Grease is a silicone-free vacuum grease and lubricant. Containing PTFE, AP100 exhibits extremely high levels of lubricity and has been shown to provide eight times the level of lubrication offered by standard, petroleum-based lubricating greases. Apiezon AP100 is designed for use at ambient temperatures (generally between 10 to 30°C / 50 to 86°F). If you are looking for a grease capable of performing at higher temperatures, Apiezon AP101 or Apiezon H Grease may be more appropriate. MSDS
Show less (-)
Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety…
Show more (+)
Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications. MSDS
Show less (-)
Type H grease is designed for high temperatures (-10 to +240°C) in a wide range…
Show more (+)
Type H grease is designed for high temperatures (-10 to +240°C) in a wide range of applications in both science and industry. With good "friction", grease H is ideal for use with laboratory glassware, but combined with properties of high thermal conductivity, it is the perfect choice for the electronics and space industries where heat sink media require adhesion. Grease H is a filled hydrocarbon which exhibits excellent thermal conductivity, and strong absorption properties. The capability to absorb greasy or chemical impurities on metal and glass surfaces is a value "tool" required by electronic industries. MSDS  
Show less (-)
Grease L is a petroleum hydrocarbon grease, containing no additives. Very low vapor pressure (@20°C…
Show more (+)
Grease L is a petroleum hydrocarbon grease, containing no additives. Very low vapor pressure (@20°C of 8x10-11 torr), high vacuum grade. Type L is widely used in the stationary phase of gas liquid chromatography, and may be used on all ground joints in a vacuum system (not for stopcocks). Its solubility is as follows: in Ethanol at 20°C-0.003%; 60°C-0.005%; 100°C-0.011%; 150°C-0.011%. Grease L softens and melts at about 47°C and it is not recommended for joints where temperatures exceed more than 30°C in use. Grease T is recommended for these higher temperatures. MSDS Technical data sheet  
Show less (-)
Similar to grease type L, but it contains more wax. Grease M has an estimated…
Show more (+)
Similar to grease type L, but it contains more wax. Grease M has an estimated vapor pressure @ 20°C of 2x10-9 torr, higher than Type L. Type M is recommended for applications where a grease of moderately low vapor pressure is required; such as for sealing ground joints on the backing side of oil diffusion pumps. MSDS Technical data sheet  
Show less (-)
Similar to Type L and Type M, but Type N grease has a special additive…
Show more (+)
Similar to Type L and Type M, but Type N grease has a special additive which gives it a tenacious, rubbery consistency and provides an extra cushioning effect which absorbs vibrations in equipment, making N grease invaluable in fragile glass to glass joints, like burette taps, which continually risk fracture. Grease N is widely recognized and recommended as the cryogenic vacuum grease of choice. MSDS Technical data sheet  
Show less (-)
Type T is designed for lubricating glass taps and for general purposes. Has a melting…
Show more (+)
Type T is designed for lubricating glass taps and for general purposes. Has a melting point of 125°C and has an estimated vapor pressure @ 20°C of 5x10-9 torr. Although type T is useful at higher temperatures, it can also be used at ambient temperatures. Temperature range: 0-120°C. MSDS  
Show less (-)
1 2 9
0

Your Cart