.png){kind=small}
.png){kind=small}
Showing all 86 results
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
Adhesive 112 is an air drying graphite coating of unusually high conductivity. It provides excellent… Show more (+) Adhesive 112 is an air drying graphite coating of unusually high conductivity. It provides excellent static bleed properties and acts as a protective energy absorbing layer. It also offers good shielding performance (30-50 db over 50-450 MHz) at a coating thickness of 2 mils. It is water based and useful in solvent prohibited applications. To […] Show less (-) |
|
Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent… Show more (+) Adhesive 154 is an easy-to-apply resistance coating designed to provide high lubricity, conductivity, and excellent release properties to many non-conductive substrates, including most plastics. It is made from a dispersion of colloidal graphite in an isopropanol base which quickly air-dries, forms an uniform thin film adherent layer. Air dries to touch in 5 minutes and […] Show less (-) |
 |
Histosol™ is the original high flash point (114°F TCC) histological clearing agent. It is intended… Show more (+) Histosol™ is the original high flash point (114°F TCC) histological clearing agent. It is intended to be used as a replacement for xylene where the hazards associated with aromatic hydrocarbon vapors are to be reduced. Museum-quality tissue slides can be prepared with Hitosol without change in protocol or procedure. Histosol is manufactured from petrochemical products and is miscible in all proportions with ethanol, isopropanol, and t-butanol. It is also miscible with all paraffin-based tissue embedding media and all permanent mounting materials.
MSDS
Storage : RT
Show less (-) |
 |
Quantity : 100ml |
|
Quantity : 30ml |
|
A special adhesive with very high electrical conductivity and permanent plasticity for the preparation of… Show more (+) A special adhesive with very high electrical conductivity and permanent plasticity for the preparation of big specimens in SEM work.
Quantity : 15g
Storage : RT Show less (-) |
|
This mounting medium is made with limonene, a natural product from orange peels. It preserves… Show more (+) This mounting medium is made with limonene, a natural product from orange peels. It preserves tissues and cell smears that can be dehydrated with organic solvents in immunohistochemistry, e.g. DAB and DAB with nickel or cobalt. Our Limonene-Mount also works well with alkaline phosphatase chromogens, and organic solvent resistant Supper Fast Red. It is also a good choice for mounting H & E stained slides.
Application: Mounting tissues and cell smears.
Storage : 2-8°CTDS_fluorogel_III
Technical Data Sheet_limonene_mount
MSDS_17987 Show less (-) |
 |
Shur/Mount is a liquid coverglass and mounting medium. Its low viscosity minimizes bubble formation under… Show more (+) Shur/Mount is a liquid coverglass and mounting medium. Its low viscosity minimizes bubble formation under the coverglass. An antioxidant present in the medium prevents fading of the stain even over years of storage. A UV absorbent present in our Shur/Mount prevents the yellowing of the resin. Available in three types: – A toluene-based acrylic resin; […] Show less (-) |
 |
409™ Super Bonder® For a general-purpose gel adhesive, clear, gap fills 0.010″; surface insensitive… Show more (+) 409™ Super Bonder® For a general-purpose gel adhesive, clear, gap fills 0.010″; surface insensitive Ethyl, tensile shear strength 3,200 psi, and temperature range -65°F to 180°F. Cure speed: fixture – 75 seconds, full – 24 hours. 454™ Prism® For use with porous surfaces, clear, gap fills 0.010″, surface insensitive Ethyl, gel type, tensile shear strength […] Show less (-) |
 |
This adhesive is perfect for those applications where a quick-curing adhesive is needed. Comes in… Show more (+) This adhesive is perfect for those applications where a quick-curing adhesive is needed. Comes in an applicator-tipped bottle, 0.33 oz. (10 ml). Show less (-) |
