.png){kind=small}
.png){kind=small}
80 résultats affichés
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
The low Shrinkage Embedding Medium Technovit 400 is a fast curing, cold polymerizing, three-component resin… Show more (+) The low Shrinkage Embedding Medium Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together […] Show less (-) |
 |
Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to… Show more (+) Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to use, and offers the best embedding results. Show less (-) |
 |
Technovit® 9100 Methyl Methacrylate Kit |
 |
An important prerequisite for easy-to-cut specimens is a mold with a special profile which will… Show more (+) An important prerequisite for easy-to-cut specimens is a mold with a special profile which will provide specimen blocks for easy application and simple cutting. This is achieved with Histoform S, an embedding mold composed of new material with a special shape. All essential requirements such as: – Material-saving volume – Easy-to-cut shape – Unlimited shelf […] Show less (-) |
 |
This unique set includes:
- Technovit Glycol Methacrylate Kit 8100 with 500 ml of GMA… Show more (+) This unique set includes:
- Technovit Glycol Methacrylate Kit 8100 with 500 ml of GMA monomer, 5 x 0.6g packs of Hardener I, and 30 ml of Hardener II
- 500 cover foils
- 100 pieces Histobloc
- 1 piece Histoform S or Q Embedding Mold
- 100 piece Histoknife H
- 1 piece microtome knife holder, 17 or 22 cm
- Technovit 3040 Kit
- Technovit 3040, 100g powder and 80 ml liquid dosing devices10:03 03/06/2019
Unit : kit Show less (-) |
 |
Histobloc for "S" ans "Q"
Unit : 100/pk |
 |
The unique EMS Technovit Polymerization Device (TPD) is a blue light curing device for all… Show more (+) The unique EMS Technovit Polymerization Device (TPD) is a blue light curing device for all Technovit resins.
The unit has built-in reflectors for homogenous curing of the blocks. The TPD fits up to 9 embedding molds and is generously sized.
Measurements (WxDxH):
170 x 160 x 120 mm (6.7 x 6.3 x 4.7 in)
Unit : each Show less (-) |
 |
UltraBed Low Viscosity Kit 2x100 m |
|
Unit : each, 1 gal
Storage : RT
MSDS |
|
This unique primer affords you a better adhesion between your resin and specimen that you… Show more (+) This unique primer affords you a better adhesion between your resin and specimen that you are embedding and prevents the sample from pulling away from the resin during sectioning.
Unit : 100 ml
Storage : RT Show less (-) |
