.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
31 résultats affichés
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
The mixture of Butyl and Methyl Methacrylate offers many advantages over the standard GMA and… Show more (+) The mixture of Butyl and Methyl Methacrylate offers many advantages over the standard GMA and HPMA embedding mediums: - It can be UV cured in the cold with the addition of benzoin methyl ether, or heat cured by the addition of benzoyl peroxide. - The resin can be removed from the sections with a solvent (acetone) before staining. Show less (-) |
|
Formulated specifically for the preparation of petrographic thin sections, EMS Petrographic Epoxy Kits are the… Show more (+) Formulated specifically for the preparation of petrographic thin sections, EMS Petrographic Epoxy Kits are the only epoxy mounting medium which is supplied with everything needed to dispense, mix and apply the medium. No more guessing at proportions, and improvising stirring rods and mixing containers. Show less (-) |
|
A water miscible epoxy resin used for both light and electron microscopy. Its low viscosity… Show more (+) A water miscible epoxy resin used for both light and electron microscopy. Its low viscosity permits easy infiltration and embedding, and yields light-colored blocks.
Kushida, H. et al., (1986) Pro. 11th Int. Cong. Electron Microsc., p. 2177. Kyoto Show less (-) |
|
Very low viscosity; monomeric styrene which penetrates rapidly into the tissues. It is soluble in… Show more (+) Very low viscosity; monomeric styrene which penetrates rapidly into the tissues. It is soluble in ethanol and acetone. The infiltration and embedding can be done by styrene alone, and there is no need to dilute it with solvents. Polymerization can be done either by UV light (340-400nm) or heat (60°C) within 2-3 days without benzoyl peroxide added; 24 hours with 1% benzoyl peroxide added as a catalyst.
Delamater et al., (1971) Pro. 29th Ann. Meet. EMSA, p. 488. Claitor's Pub. Div., Baton Rouge, La.
Kushida, H. (1962b) J. Electron Microsc., 11:128
Kushida, H. (1961a) J. Electron Microsc., 10:16
MSDS
Technical Data Sheet : Styrene Monomer Polyester Resin Embedding
Storage : RT
Unit : kit Show less (-) |
 |
Same as the Kwik Gard™, but in its original container. A two-part silicone elastomer, ideal… Show more (+) Same as the Kwik Gard™, but in its original container. A two-part silicone elastomer, ideal for potting and encapsulating applications. Very low dielectric constant sealing compound used in patch clamping and many other lab applications. After cure, will withstand -55° to 200 °C. Curing time for this silicone 24hrs @ 25°C, and 15 min. @ 150°C.
Unit : kit Show less (-) |
|
Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a… Show more (+) Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a firm, durable bond between Technovit and the specimen. Show less (-) |
|
The low Shrinkage Embedding Medium Technovit 400 is a fast curing, cold polymerizing, three-component resin… Show more (+) The low Shrinkage Embedding Medium Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together […] Show less (-) |
 |
Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to… Show more (+) Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to use, and offers the best embedding results. Show less (-) |
 |
Technovit® 9100 Methyl Methacrylate Kit |
 |
This unique set includes:
- Technovit Glycol Methacrylate Kit 8100 with 500 ml of GMA… Show more (+) This unique set includes:
- Technovit Glycol Methacrylate Kit 8100 with 500 ml of GMA monomer, 5 x 0.6g packs of Hardener I, and 30 ml of Hardener II
- 500 cover foils
- 100 pieces Histobloc
- 1 piece Histoform S or Q Embedding Mold
- 100 piece Histoknife H
- 1 piece microtome knife holder, 17 or 22 cm
- Technovit 3040 Kit
- Technovit 3040, 100g powder and 80 ml liquid dosing devices10:03 03/06/2019
Unit : kit Show less (-) |
