.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
32 résultats affichés
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
Glycol Methacrylate embedding medium provides excellent preservation (especially enzymatic autoradiographic studies). Good for E.M… Show more (+) Glycol Methacrylate embedding medium provides excellent preservation (especially enzymatic autoradiographic studies). Good for E.M., L.M., and Histo. Leduc. & Bernard, (1967)
J. Ultrastr. Res., 4, 196-99.
Kit consists of :
450 ml Glycol methacrylate, GMA
MSDS_16800
225 ml n-Butyl methacrylate
MSDS_12100
15 gm Benzoyl Peroxide Paste
MSDS_benzperox
Technical Data Sheet Show less (-) |
|
Polyethylene Glycol - Glycol methacrylate mixture. A water miscible embedding medium for cytochemical studies and… Show more (+) Polyethylene Glycol - Glycol methacrylate mixture. A water miscible embedding medium for cytochemical studies and enzyme localization when light and electron microscopy need to be correlated.
Spaur, R.C. & Moriarty, G., (1977) J Histochem. Cytochem., 23:16 Show less (-) |
|
A newly formulated resin that enables the processing of specimens that have a tendency to… Show more (+) A newly formulated resin that enables the processing of specimens that have a tendency to wrinkle and be problematic.
Unit : kit Show less (-) |
 |
Histocryl acrylic resin has been specially formulated for light microscopy. It is water clear, and… Show more (+) Histocryl acrylic resin has been specially formulated for light microscopy. It is water clear, and because it is hydrophilic (polar) it permits the use of most routine staining techniques without priorremoval or etching.
Kit consists of:
500 ml Histocryl Resin
50g Histocryl Catalyst (B.P.)
10 ml Histocryl Accelerator Show less (-) |
 |
HPMA is a water-soluble resinHydroxyPropyl MethAcrylate = HPMA |
 |
JB-4 Plus offers all of the same features as JB-4 except it produces less of… Show more (+) JB-4 Plus offers all of the same features as JB-4 except it produces less of an exothermic reaction than JB-4 which is good for temperature sensitive tissues.
Technical Data Sheet : JB-4 Plus
MSDS_14272-01
MSDS_14272-04
MSDS_14272-06
Show less (-) |
|
A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It… Show more (+) A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent; therefore, complete dehydration through 100% ethanol is not necessary (although recommended for large or dense tissues). Conventional paraffin […] Show less (-) |
 |
Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness… Show more (+) Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam.
Spurr, A.R., (1969) J. Ultrastruct. Res. 26, 31-42 Show less (-) |
|
Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range… Show more (+) Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures.
The K4M kit is usable to -35°C and is a polar (hydrophilic) medium, while the HM20 kit can be used down to -70°C and is nonpolar (hydrophobic).
Lowicryl's K11M and HM23 have properties similar to K4M and HM20, but can be used at temperatures 20 degrees lower than others: K11M at -60°C, HM23 at least -80°C. All of these resins are photopolymerized by long wavelength (360nm) ultraviolet light. Since the initiation of the polymerization is largely independent of temperatures, blocks may be polymerized at the same temperatures used for infiltration. The resin may also be chemically polymerized at 60°C.
Armbruster, B.L. et al, (1982). J. Microscopy 126: 77
Carlemalm, E. et al, (1985). J. Microscopy 140:55
Hayat, M.A. (Ed.). (1989) Priciples and Techniques of Electron Microscopy, 3rd Edition. CRC Press,Inc. Boca Raton, Florida. Show less (-) |
|
The London Resin Company's acrylic "LR Gold" offers the histochemist and immunocytochemist the advantage of… Show more (+) The London Resin Company's acrylic "LR Gold" offers the histochemist and immunocytochemist the advantage of working with unfixed tissues at low temperatures, thus allowing many fixation-sensitive procedures to be carried out in 1-4 microns resin sections at -25°C using visible light. It is non-toxic and has a low viscosity. Show less (-) |
