.png){kind=small}
.png){kind=small}
48 résultats affichés
 | Polyethylene embedding capsules with 1x1mm face at the tip of a truncated pyramid, each with a hinged cap. |
 | A two tone color coded plastic box with insert, which allows for the storage of up to 10 blocks in the numbered cavities. Measures: 2⅓" (L) x 1¾" (W) x ½" (H) 57 x 45 x 12.5 mm |
 | These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation. Use the clear if microwaving or UV polymerizing your embedding media. Made from Polypropylene. Available in two sizes: one holds size "00", conical, and bottle neck capsules; the other holds size #3 capsules. Available in white or clear. Size "00" Measures 5½" (L) x 4" (W) x ⅞" (H), 138 x 100 x 22mm |
 | These capsules, made from polyethylene, produce blocks with a 5.6mm O.D. and a pyramid tip. Comes complete with a hinged cap. |
 | Available in two specially shaped capsules which are designed to overcome commonly encountered embedding problems; such as, small or thin elongated specimens and powder samples. These capsules are also good for centrifuging precipitated matters and allows for less trimming. The bottle neck capsule produces a 7.9mm OD block with a hemihyperpoloid (rather than faced) tip. The conical capsule produces a 7.9mm OD block with a conical (rather than faced) tip |
 | |
 | Molded from polyethylene. The critical surfaces of the mold are transparent, facilitating accurate specimen orientation through bottom illumination. Molds are reusable and each mold is supplied with a protective box.
The cavity measures: 12 mm L x 5 mm W x 3 mm D
Overall mold measures: 52 mm L x 40 mm W x 5 mm H
Storage box measures: 2⅓" L x 1¾" W x ½" H (57 x 45 x 12.5 mm)
each |
 | Made from silicone
It accommodates 96 gelatin capsules size "00" and "000" and BEEM® "00"
for resin polymerization in an oven
Mesures : 110mm x 72mm |
 | Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable and produce embedding blocks of numerous shapes and sizes with a wide variety of tips. We also offer a mold which produces blocks to be used for re-embedding. Choose the one that best suits your embedding needs! |
 | Natural, hard gelatin capsules. To be used as an embedding mold for water miscible resins, or resins which need to be cured by transmitted light. Gelatin capsules dissolve or disintegrate within 5 minutes when immersed in a 0.5% HCl solution at 36-38°C, within 2 minutes in water at 37°C or in artificial gastric juice. |
