.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
.png?strip=all&lossy=1&sharp=1&ssl=1){kind=small}
34 résultats affichés
Filtres
Trier les résultats
Rafraîchir
Appliquer
 |
Molded from polyethylene. The critical surfaces of the mold are transparent, facilitating accurate specimen orientation… Show more (+) Molded from polyethylene. The critical surfaces of the mold are transparent, facilitating accurate specimen orientation through bottom illumination. Molds are reusable and each mold is supplied with a protective box.
The cavity measures: 12 mm L x 5 mm W x 3 mm D
Overall mold measures: 52 mm L x 40 mm W x 5 mm H
Storage box measures: 2⅓" L x 1¾" W x ½" H (57 x 45 x 12.5 mm)
each Show less (-) |
 |
Made from silicone
It accommodates 96 gelatin capsules size "00" and "000" and BEEM® "00"
… Show more (+) Made from silicone
It accommodates 96 gelatin capsules size "00" and "000" and BEEM® "00"
for resin polymerization in an oven
Mesures : 110mm x 72mm Show less (-) |
 |
Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance… Show more (+) Our molds are made from the strongest possible silicone rubber providing extremely high tear resistance. They are all reusable and produce embedding blocks of numerous shapes and sizes with a wide variety of tips. We also offer a mold which produces blocks to be used for re-embedding. Choose the one that best suits your embedding needs! Show less (-) |
 |
Designed by Dr. J.P. Chang for the embedding of a monolayer of cells. This… Show more (+) Designed by Dr. J.P. Chang for the embedding of a monolayer of cells. This specially designed mold has proven useful in the processing of frozen sections, ascite cells, fresh imprints, as well as blood and marrow smears. J. of Ultrastructural Res., 37, 370 (1971). Show less (-) |
 |
A two-directional mold that allows for single embedded specimens to be sectioned both laterally and… Show more (+) A two-directional mold that allows for single embedded specimens to be sectioned both laterally and transversely. Tissues to be embedded are accurately trimmed and placed so that both sides of the tissue are against both edges of the cavity tip.Chien, K., et al. (1985) Proc. Ann. EMSA Meeting 43, 460 Show less (-) |
 |
A standard flat embedding mold where both ends are tapered. This enables you to embed… Show more (+) A standard flat embedding mold where both ends are tapered. This enables you to embed specimens in both ends of each casting. Made from white silicone, 21 numbered cavities, each cavity measuring: 14mm L x 4mm W x 4mm D Show less (-) |
 |
Made from colored clear silicone, more flexible. These flat molds are reusable. For all Epoxy… Show more (+) Made from colored clear silicone, more flexible. These flat molds are reusable. For all Epoxy resinwith better coating of the sample on all four sidesMold Measurements:80 x 112 mm, 21 big Cavities: 15 x 7 x 3,5 mm thickEach cavity has an marking : A - U Show less (-) |
 |
These flat molds are reusable. For all Epoxy resinwith better coating of the sample on… Show more (+) These flat molds are reusable. For all Epoxy resinwith better coating of the sample on all four sides Show less (-) |
 |
Made from colored clear silicone, more flexible. These flat molds are reusable. For all Epoxy… Show more (+) Made from colored clear silicone, more flexible. These flat molds are reusable. For all Epoxy resinMold Measurements: 2,8″ x 3,9″ (72 x 99 mm), 24 small Cavities: 4 x 13 x 3,5 mm thick , double end.Each cavity has an marking : A-Z Show less (-) |
 |
These flat molds are reusable. For all Epoxy resinwith better coating of the sample on… Show more (+) These flat molds are reusable. For all Epoxy resinwith better coating of the sample on all four sides Show less (-) |
